The OpenNET Project / Index page
BSD, Linux, Cisco, Web, Palm, other unix
RUSSIAN version

Search
Новость: Введение в систему контроля версий программ - Subversion
SOFT - Unix Software catalog
LINKS - Unix resources
TOPIC - Articles from usenet
DOCUMENTATION - Unix guides
News | Tips | MAN | Forum | BUGs | LastSoft | Keywords | BOOKS (selected) | Linux HowTo | FAQ Archive

Process table attack (from RISKS Digest)


<< Previous INDEX Search src Set bookmark Go to bookmark Next >>
Date: Sat, 20 Feb 1999 13:42:53 -0800
From: Mark Boolootian <booloo@CATS.UCSC.EDU>
To: BUGTRAQ@NETSPACE.ORG
Subject: Process table attack (from RISKS Digest)

Date: Fri, 19 Feb 1999 16:08:06 -0500
>From: "Simson L. Garfinkel" <simsong@vineyard.net>
Subject: Process-table attack

Wide-ranging attack works against almost any UNIX systems on the Internet

ABSTRACT:

The Process Table Attack is a [relatively] new kind of denial-of-service
attack that can be waged against numerous network services on a variety of
different UNIX systems. The attack is launched against network services
which fork() or otherwise allocate a new process for each incoming TCP/IP
connection.  Although the standard UNIX operating system places limits on
the number of processes that any one user may launch, there are no limits on
the number of processes that the superuser can create other than the hard
limits imposed by the operating system. Since incoming TCP/IP connections
are usually handled by servers that run as root, it is possible to
completely fill a target machine's process table with multiple
instantiations of network servers. Properly executed, this attack prevents
any other command from being executed on the target machine.

DETAILS

In the book Practical UNIX and Internet Security, Gene Spafford and I
observed that the UNIX operating system originally contained few defenses to
protect it from a denial-of-service attack. This is changing. With the
growth of the Internet, there has been a concerted effort in recent years to
strengthen the operating system and its network services to these attacks.

Each time a network client makes a connection to a network server, a number
of resources on the server are consumed. The most important resources
consumed are memory, disk space, and CPU time. Some network services, such
as sendmail, now monitor system resources and will not accept incoming
network connections if accepting them would place the system in jeopardy.

One system resource that has escaped monitoring is the number of processes
that are currently running on a computer. Most versions of UNIX will only
allow a certain number of processes to be running at one time. Each process
takes up a slot in the system's process table. By filling this table, it is
possible to prevent the operating system from creating new processes, even
when other resources (such as memory, disk space, and CPU time) are widely
available.

The implementation of many network services leaves them open to a process
table attack ? that is, an attack in which the attacker fills up the target
computer's process table so that no new programs can be executed.  The
design of some network protocols actually leads the programmer into making
these mistakes.

An example of such a protocol is the finger protocol (TCP port 79). The
protocol follows this sequence:

  1. The client makes a connection to the server.
  2. The server accepts the connection, and creates a process to service
     the request.
  3. The client sends a single line to the server consisting of the name
     of the entity that the client wishes to finger.
  4. The server performs the necessary database lookup and sends the
     information back to the client.
  5. The server closes the connection.

To launch a process table attack, the client need only open a connection to
the server and not send any information. As long as the client holds the
connection open, the server's process will occupy a slot in the server's
process table.

On most computers, finger is launched by inetd. The authors of inetd placed
several checks into the program's source code which must be bypassed in
order to initiate a successful process attack. If the inetd receives more
than 40 connections to a particular service within 1 minute, that service is
disabled for 10 minutes. The purpose of these checks was not to protect the
server against a process table attack, but to protect the server against
buggy code that might create many connections in rapid-fire sequence.

To launch a successful process table attack against a computer running inetd
and finger, the following sequence may be followed:

  1. Open a connection to the target's finger port.
  2. Wait for 4 seconds.
  3. Repeat steps 1-2.

The attack program is not without technical difficulty. Many systems limit
the number TCP connections that may be initiated by a single process. Thus,
it may be necessary to launch the attack from multiple processes, perhaps
running on multiple computers.

We have tested a variety of network services on a variety of operating
systems. We believe that the UW imap and sendmail servers are also
vulnerable.  The UW imap contains no checks for rapid-fire connections.
Thus, it is possible to shut down a computer by opening multiple connections
to the imap server in rapid succession. With sendmail the situation is
reversed. Normally, sendmail will not accept connections after the system
load has jumped above a predefined level. Thus, to initiate a successful
sendmail attack it is necessary to open the connections very slowly, so that
the process table keeps growing in size while the system load remains more
or less constant.

We have also seen a variety of problems on BSD-based machines being used as
the attacker. When the target machine freezes or crashes, the attacker
machine sometimes crashes as well. Apparently the TCP stack does not
gracefully handle hundreds of connections to the same port on the same
machine simultaneously going into the FIN_WAIT_2 state.

There are variants of this attack:

  1. Use IP spoofing so that the incoming connections appear to come from
     many different locations on the Internet. This makes tracking
     considerably harder to do.
  2. Begin the attack by sending 50 requests in rapid fire to the telnet,
     rlogin and rsh ports on the target machine. This will cause inetd to
     shut down those services on the target machine, which will deny
     administrative access during the attack.
  3. Instead of initiating a new connection every 4 seconds, initiate one
     every minute or so. The attack slowly builds, making it more difficult
     to detect on packet traces.

There are several ways to defend against the attack:

  1. inetd and other programs should check to see the number of free slots
     in the process table before accepting new connections. If there is less
     than a predefined number of free slots, new connections should be
     accepted.
  2. Alternatively, if there are more than a preset number of network daemons
     for the service running, incoming requests should be queued rather than
     serviced.
  3. Network services (such as finger) should implement timeouts. For
     example, the statement alarm(30) could be inserted into the finger
     daemon source code so that the program would stop running after 30
     seconds of execution.

Simson L. Garfinkel, Sandstorm Enterprises, Inc. <www.sandstorm.net>

  [Simson informed me over a year ago that he had discovered this attack
  and had notified many relevant operating system vendors.  To the best of
  my knowledge, no one has addressed the problem in the intervening year.
  We thus include this item in the hopes of spurring some action, or at
  least awareness and public discussion.  On the other hand, we of course
  do not recommend conducting experiments to demonstrate this flaw on
  other people's systems.  PGN]

<< Previous INDEX Search src Set bookmark Go to bookmark Next >>
Закладки
Добавить в закладки
Created 1996-2003 by Maxim Chirkov  
ДобавитьРекламаВебмастеруЦУПГИД  
SpyLOG TopList