Posts Tagged ‘Linux’

« Older Entries
Newer Entries »

How to get rid of “PHP Warning: PHP Startup: Unable to load dynamic library ‘/usr/lib/php5/20090626/suhosin.so'” on Debian GNU / Linux

Tuesday, October 25th, 2011

PHP-warning-how-to-fix-warnings-and-errors-php-logo

After a recent new Debian Squeeze Apache+PHP server install and moving a website from another server host running on CentOS 5.7 Linux server, some of the PHP scripts running via crontab started displaying the following annoying PHP Warnings :

debian:~# php /home/website/www/cron/update.php

PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/suhosin.so' – /usr/lib/php5/20090626/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0

Obviously the error revealed that PHP cli is not happy that, I've previously removes the suhosin php5-suhosin module from the system.
I wouldn't have removed php5-suhosin if sometimes it doesn't produced some odd experiences with the Apache webserver.
To fix the PHP Warning, I used first grep to see, where exactly the suhosin module gets included in debian's php.ini config files. debian:~# cd /etc/php5
debian:/etc/php5# grep -rli suhosin *
apache2/conf.d/suhosin.ini
cgi/conf.d/suhosin.ini
cli/conf.d/suhosin.ini
conf.d/suhosin.ini

Yeah that's right Debian has three php.ini php config files. One for the php cli – /usr/bin/php, another for the Apache webserver loaded php library – /usr/lib/apache2/modules/libphp5.so and one for Apache's cgi module – /usr/lib/apache2/modules/mod_fcgid.so .

I was too lazy to edit all the above found declarations trying to include the suhosin module in PHP, hence I remembered that probably all this obsolete suhosin module declaration are still present because probably the php5-suhosin package is still not purged from the system.

A quick check with dpkg , further strenthened my assumption as the php5-suhosin module was still hanging around as an (rc – remove candidate);

debian:~# dpkg -l |grep -i suhosin
rc php5-suhosin 0.9.32.1-1 advanced protection module for php5

Hence to remove the obsolete package config and directories completely out of the system and hence solve the PHP Warning I used dpkg –purge, like so:

debian:~# dpkg --purge php5-suhosin
(Reading database ... 76048 files and directories currently installed.)
Removing php5-suhosin ...
Purging configuration files for php5-suhosin ...
Processing triggers for libapache2-mod-php5 ...
Reloading web server config: apache2.

Further on to make sure the PHP Warning is solved I did the cron php script another go and it produced no longer errors:

debian:~# php /home/website/www/cron/update.php
debian:~#

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Posted in Linux, System Administration, Various, Web and CMS | 8 Comments »

How to disable tidy HTML corrector and validator to output error and warning messages

Sunday, March 18th, 2012

I've noticed in /var/log/apache2/error.log on one of the Debian servers I manage a lot of warnings and errors produced by tidy – HTML syntax checker and reformatter program.

There were actually quite plenty frequently appearing messages in the the log like:

...
To learn more about HTML Tidy see http://tidy.sourceforge.net
Please fill bug reports and queries using the "tracker" on the Tidy web site.
Additionally, questions can be sent to html-tidy@w3.org
HTML and CSS specifications are available from http://www.w3.org/
Lobby your company to join W3C, see http://www.w3.org/Consortium
line 1 column 1 - Warning: missing <!DOCTYPE> declaration
line 1 column 1 - Warning: plain text isn't allowed in <head> elements
line 1 column 1 - Info: <head> previously mentioned
line 1 column 1 - Warning: inserting implicit <body>
line 1 column 1 - Warning: inserting missing 'title' element
Info: Document content looks like HTML 3.2
4 warnings, 0 errors were found!
...

I did a quick investigation on where from this messages are logged in error.log, and discovered few .php scripts in one of the websites containing the tidy string.
I used Linux find + grep cmds find in all php files the "tidy "string, like so:

server:~# find . -iname '*.php'-exec grep -rli 'tidy' '{}' ;
find . -iname '*.php' -exec grep -rli 'tidy' '{}' ; ./new_design/modules/index.mod.php
./modules/index.mod.php
./modules/index_1.mod.php
./modules/index1.mod.php

Opening the files, with vim to check about how tidy is invoked, revealed tidy calls like:

exec('/usr/bin/tidy -e -ashtml -utf8 '.$tmp_name,$rett);

As you see the PHP programmers who wrote this website, made a bigtidy mess. Instead of using php5's tidy module, they hard coded tidy external command to be invoked via php's exec(); external tidy command invocation.
This is extremely bad practice, since it spawns the command via a pseudo limited apache shell.
I've notified about the issue, but I don't know when, the external tidy calls will be rewritten.

Until the external tidy invocations are rewritten to use the php tidy module, I decided to at least remove the tidy warnings and errors output.

To remove the warning and error messages I've changed:

exec('/usr/bin/tidy -e -ashtml -utf8 '.$tmp_name,$rett);

exec('/usr/bin/tidy --show-warnings no --show-errors no -q -e -ashtml -utf8 '.$tmp_name,$rett);

The extra switches meaning is like so:

q – instructs tidy to produce quiet output
-e – show only errors and warnings
–show warnings no && –show errors no, completely disable warnings and error output

Onwards tidy no longer logs junk messages in error.log Not logging all this useless warnings and errors has positive effect on overall server performance especially, when the scripts, running /usr/bin/tidy are called as frequently as 1000 times per sec. or more

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Posted in System Administration, Web and CMS | No Comments »

Play Midis on Linux / Make Linux MIDI Ready for the Future – Enable embedded MIDI music to play in a Browser, Play MIDIs with VLC and howto enjoy Midis in Text Console

Wednesday, October 4th, 2017

how-to-play-midi-on-gnu-linux-in-graphic-environment-console-and-browser-midi-synthesizer-and-linux-tux-together

 

Play Midis on Linux or Make Linux MIDI Ready for the Future – Enable embedded MIDI music to play in a Browser, Play MIDIs with VLC and howto enjoy Midis in Text Console HOWTO

 

Playing MIDI has been quite a lot of fun historically,

if you grow up in the days when personal computers were still young and the Sound Blaster was a luxury, before the raise of Mp3 music format, you have certainly enjoyed the beeping of PC Speaker and later on during 386 and 486 / 586 computers the enjoyment of playing tracked music such as S3M and MOD,

in that good days playing MIDI music was the only alternative for PC maniacs who doesn't own a CD Drive (which itself) was another luxury and even thouse who had a CD ROM device, were mainly playing music in CD audio format (.CDA).
Anyhow MIDI was a cheap and a CPU unintensive way to listen to equivalent of favourite popular Audio Songs and for those who still remember many of the songs were recreated in MIDI format, just with a number of synthesized instruments without any voice (as MIDI is usually).

The same was true also for the good old days of raise of Mobile Phones, when polyphonic was a standard as CPU power was low MIDI was a perfect substitute for the CPU heavy Encoded MP3s / OGG and other formats that required a modern for that time Intel CPU running in 50+ Mhz usually 100 / 166Mhz was perfect for the days to play Mp3 but still even on that PCs we listened to Midi songs.

Therefore if you're one of those people like me who still enjoy to play some Midi Music in the year 2017 and feel a bit like Back into the Future movie and a Free Software fan and user, especially if you're a novice GNU  / Linux Free Software user, you will be unpleasently surprised that most today's default Linux distributions doesn't have an easy way to play Midi music format out of the box right after install.

Hence below article aims to give you an understanding on

How you can play Midi Music on GNU / Linux Operating System

First, lets Prepare to load necessery Linux kernel modules to make sure MIDI can be played by soundcard:

In /etc/modules make sure you have the following list of modules loaded:
 

linux-desktop:~# cat /etc/modules
3c59x
snd-emu10k1
snd-pcm-oss
snd-mixer-oss
snd-seq-oss

!Note the modules are working as of time of writting and in time can change to some other modules, depending on how the development of ALSA (Advanced Linux Sound Architecture) goes, and if the developers decide to rename the upmentioned modules

If you just have added the modules to /etc/modules with vim / nano to reload modules into the Linux kernel run:

 

linux-desktop:~# modprobe -a


Secondly, Installing a whole bunch of MIDI music related program tools can be achieved in Debian by installing the multimedia-midi package, e.g.:

 

linux-desktop:~# apt-get install –yes multimedia-midi

 

1. Playing Midi in Graphical environment with a double click using VLC


How to make MIDI easy listanable in Linux graphical environment like GNOME / KDE / XFCE desktop ?

 

If you want to make Midi music execution sa easy as  just clicking on the .MIDI file format on Linux you can do that with a midi extension available for VLC (Video Lan Client) Universal Multi Platform Media Player player

To install it on Debian Ubuntu GNU / Linux
 

# apt-get install –yes vlc-plugin-fluidsynth

 

Необходимо е да се изтеглят 6754 B архиви.
След тази операция ще бъде използвано 35,8 kB допълнително дисково пространство.
Изт:1 http://deb.debian.org/debian stretch/main amd64 vlc-plugin-fluidsynth amd64 2.2.6-1~deb9u1 [6754 B]
Изтеглени 6754 B за 0с (33,6 kB/сек)           
Selecting previously unselected package vlc-plugin-fluidsynth:amd64.
(Reading database … 382976 files and directories currently installed.)
Preparing to unpack …/vlc-plugin-fluidsynth_2.2.6-1~deb9u1_amd64.deb …
Unpacking vlc-plugin-fluidsynth:amd64 (2.2.6-1~deb9u1) …
Setting up vlc-plugin-fluidsynth:amd64 (2.2.6-1~deb9u1) …
Processing triggers for libvlc-bin:amd64 (2.2.6-1~deb9u1) …


Besides making your MIDI play on the GUI environment easy as a a point and click VLC will also be able to play MIDIs on GNU / Linux from your favourite browser (nomatter Firefox / Chrome or Opera), even though the player would play in a new PopUP Window it is easy to select once MIDI file from a random website for example – here is a directory listing of Webserver with Doom II Soundtrack in MIDI format , click over any file from list and Choose option for VLC to always remember that MIDI files has to be opened with VLC player.
 


2. Enable Firefox / IceWeasel browser to Support Website embedded MIDI files

 

 

So VLC could make you listen the downloadable MIDIs from Web pages but,
 

What if you have stumbled on an old website which was configured with very OLD HTML Code to play some nice music (or even different MIDI songs) for each part of the website (for each webpage) and you want to have the Websites created with embedded MIDIs to automatically play on Linux oncce you visit the site?


Sadly default support in Browser for MIDI across all GNU / Linux, I've used so far never worked out of the box, not that still anyone is developing modern websites with MIDIs, but still for the sake of backward compitability and for sake of interactivity it is worthy to enable embedded MIDI support in Linux

But with a couple of tunings as usual GNU / Linux can do almost everything, so here is how to enable embedded browser support for Midi on Linux (That should work with minor modifications not only on Debian / Ubuntu / ArchLinux but also on Fedoras, CentOS etc.
If you try it on any of this distributions, please drop a short comment and tell me in few lines how you made embedded midi worked on that distros.

 

apt-get install –yes timidity mozplugger

Next do restart firefox

Sometimes in order to work you might need to delete /home/[YOUR_USERNAME]/.mozilla/pluginreg.dat and restart firefox again, e.g. make a backup and give it a try:

 

cp -rpf /home/hipo/.mozilla/pluginreg.dat /home/hipo/.mozilla/pluginreg.dat.bak
rm -f /home/hipo/.mozilla/pluginreg.dat

 

Another good tip as talking for embedding MIDI support is to embed XPDF to render PDF pages inside the Browser, by default this is done by GNOME's Evince PDF reader but as it is sometimes buggy and might crash it is generally a good idea to switch to xpdf instead, if for some reason PDF is not directly displaying in browser or suddenly stopped working after some distro uipgrade, you might want to do below as well:
 

apt-get install xpdf

vim /etc/mozpluggerrc

Fin d and Comment out the line starting with:

It should look like this afterwards:

 Repeat Swallow ….
 

text/x-pdf: pdf: PDF file
#      repeat swallow(documentShell) fill: acroread -geometry +9000+9000 +useFrontEndProgram "$file"
        repeat noisy swallow(Xpdf) fill: xpdf -g +9000+9000 "$file"
        repeat noisy swallow(gv) fill: gv –safer –quiet –antialias -geometry +9000+9000 "$file"


 

3. Play Midi music in Linux text console / terminal


There is a console tool that historically has been like the Linux standard for playing midis over the years as I remember, its called timidity

 


To install timidity on .Deb based Linux:
 

linux-desktop:~$ su root
Password:
linux-desktop:~# apt-get install –yes timidity
Необходимо е да се изтеглят 0 B/580 kB архиви.
След тази операция ще бъде използвано 0 B допълнително дисково пространство.
(Reading database … 382981 files and directories currently installed.)
Preparing to unpack …/timidity_2.13.2-40.5_amd64.deb …
Unpacking timidity (2.13.2-40.5) over (2.13.2-40.5) …
Processing triggers for menu (2.1.47+b1) …
Processing triggers for man-db (2.7.6.1-2) …
Setting up timidity (2.13.2-40.5) …
Processing triggers for menu (2.1.47+b1) …

 

To test your new MIDI Synthesizer tool and make the enjoyment full you can download Doom 2 extracted MIDI Soundtrack from here
 

Once you have downloaded above Metal MIDI DOOM old school arcade soundtrack and untarred it into your home directory be it ~/doom-midis

A remark to make here is timidity is quite CPU intensive, but on modern Dual and Quad-Core PC Notebooks, the CPU load is not of a big concern.

To test and play with timidity:
 

linux-desktop~$ timidity ~/mp3/midis/*


timidity-playing-doom-midi-bunny-song-on-debian-stretch-gnome-terminal-screenshot
 

hipo@jericho:~/mp3/midis$ aplaymidi -l
 Port    Client name                      Port name
 14:0    Midi Through                     Midi Through Port-0
128:0    TiMidity                         TiMidity port 0
128:1    TiMidity                         TiMidity port 1
128:2    TiMidity                         TiMidity port 2
128:3    TiMidity                         TiMidity port 3

 


We have also the playmidi  (simple midi text console terminal player), which historically was working quite decent and I use it to in the past on my RedHat 6.0 and RedHat 7.0 to listen to my .MID format files but unfortunately as of time of writting something is wrong with it, so when I try to play MIDIs with it instead of timidity I get this erro:

 

$ playmidi *.mid
Playmidi 2.4 Copyright (C) 1994-1997 Nathan I. Laredo, AWE32 by Takashi Iwai
This is free software with ABSOLUTELY NO WARRANTY.
For details please see the file COPYING.
open /dev/sequencer: No such file or directory

Even though I tried hard to resolve that error by loading various midi related MIDI modules and following a lot of the suggestions online on how to  make /dev/sequencer work again it was all no luck.
 

Some people back in the distant year 2005, reported the problem was solved by simply loading snd-seq

But as of time of writting:

 

# modprobe snd-seq

 

Some people said in archlinux's Forum

/dev/sequencer sequencer: No such file or directory

 

is solved by loading snd-seq-oss kernel module, but on my Debian Linux 9.1 Stretch, this ain't work as well :

 

root@jericho:/home/hipo/mp3/midis# modprobe snd-seq-oss
modprobe: FATAL: Module snd-seq-oss not found in directory /lib/modules/4.9.0-3-amd64
root@jericho:/home/hipo/mp3/midis# uname -a;
Linux jericho 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19) x86_64 GNU/Linux


Another invention of mine was to try to also link /dev/snd/seq to /dev/sequencer but this produced no positive result either:

 

# ln -sf /dev/snd/seq /dev/sequencer
# ls -al /dev/sequencer
lrwxrwxrwx 1 root root 12 окт  4 16:48 /dev/sequencer -> /dev/snd/seq


Note that after lining in that way I got following error with my attempt to play MIDIs with playmidi

# playmidi *.mid
Playmidi 2.4 Copyright (C) 1994-1997 Nathan I. Laredo, AWE32 by Takashi Iwai
This is free software with ABSOLUTELY NO WARRANTY.
For details please see the file COPYING.
there is no soundcard


Anyhow on some other Linux distributions (especially with Older Kernel versions), some of the above 3 suggested Fix might work perfectly fine so if you have some time give it a try please and drop me  a comment on how it went, you will help the GNU / Linux community out there that way.

Well never mind the bollocks, so

Now back to where I started timidity even though it will play fine it will not give any indication on the lenght of the midi song (precious information such as how much time is left until the end is over).

Hence if you prefer a player that gives you an indicator on how much is left towards the end length of each of the played MIDI file you can give a try to wildmidi:

 

linux-desktop:~$ apt-cache show wildmidi|grep -i description -A 2

Description-en: software MIDI player
 Minimal MIDI player implementation based on the wildmidi library that
 can either dump to WAV or playback over ALSA. It is intended to
—
Description-md5: b4b34070ae88e73e3289b751230cfc89
Homepage: http://www.mindwerks.net/projects/wildmidi/
Tag: implemented-in::c, role::program, sound::midi, sound::player,
—
Description: software MIDI player
Description-md5: 4673a7051f104675c73eb344bb045607
Homepage: http://wildmidi.sourceforge.net/
Bugs: https://bugs.launchpad.net/ubuntu/+filebug


If yet not installed install it after becoming admin user:

 

linux-desktop:~$ su root
Password:
linux-desktop:~# apt-get install –yes wildmidi


wildmidi is much less CPU intensive (it uses gstreamer to play (Gstreamer – open source multimedia framework)

And next give it a try by running:

 

linux-desktop:~$ wildmidi ~/mp3/midis/*

 

wildmidi-midi-lenght-status-text-console-player-for-linux-ubuntu-debian-fedora-suse

 

 

4. Editting MIDI files with Free Software and Proprietary MIDI Editor Programs

 


If you want a professional software that can play Midi in a fuzzy interactive GUI way and have some extra possibilities to edit MIDIs and other format give a try to Muse Sequencer:
 

 

linux-desktop:~$ sudo apt-get install –yes muse

The following NEW packages will be installed:
  muse
0 upgraded, 1 newly installed, 0 to remove and 38 not upgraded.
Need to get 5814 kB of archives.
After this operation, 21.0 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian stretch/main amd64 muse amd64 2.1.2-3+b1 [5814 kB]
Fetched 5814 kB in 2s (2205 kB/s)                             
    are supported and installed on your system.
Preconfiguring packages …
Selecting previously unselected package muse.
(Reading database … 382981 files and directories currently installed.)
Preparing to unpack …/muse_2.1.2-3+b1_amd64.deb …
Unpacking muse (2.1.2-3+b1) …
Processing triggers for mime-support (3.60) …
Processing triggers for desktop-file-utils (0.23-1) …
Processing triggers for doc-base (0.10.7) …
Processing 1 added doc-base file…
Registering documents with scrollkeeper…
Processing triggers for man-db (2.7.6.1-2) …
Processing triggers for shared-mime-info (1.8-1) …
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Processing triggers for gnome-menus (3.13.3-9) …
Setting up muse (2.1.2-3+b1) …
Processing triggers for hicolor-icon-theme (0.15-1) …


 

Below is short description what Muse can do for you:

 

MusE is a MIDI/audio sequencer with recording and editing capabilities.
 Some Highlights:
 
  * Standard midifile (smf) import-/export.
  * Organizes songs in tracks and parts which you can arrange with
    the part editor.
  * MIDI editors: pianoroll, drum, list, controller.
  * Score editor with high quality postscript printer output.
  * Realtime: editing while playing.
  * Unlimited number of open editors.
  * Unlimited undo/redo.
  * Realtime and step-recording.
  * Multiple MIDI devices.
  * Unlimited number of tracks.
  * Sync to external devices: MTC/MMC, Midi Clock, Master/Slave.
  * Audio tracks, LADSPA host for master effects.
  * Multithreaded.
  * Uses raw MIDI devices.
  * XML project file.
  * Project file contains complete app state (session data).
  * Application spanning Cut/Paste Drag/Drop.

 

linux-desktop~:$ muse

muse-advanced-midi-editor-free-software-for-linux

 

Below is another non-free program that you might, try if MusE doesn't fit your needs (is not rich enough for editting capabilities is bitwig (though I don't recommend since it is not free software)

bitwig – Bitwig Studio is a multi-platform music-creation system for production, performance and DJing, with a focus on flexible editing tools and a super-fast workflow.
 


bitwig-midi-and-audio-non-free-software-advanced-useful-sound-editor-for-linx


 

5. Some examples for Text editing and MIDI Conversion to CSV and ABC file formats There is pretty much more

For the MIDI Extremists who or people that create MIDIs and want to learn how a MIDI is made (the content of it etc.), I suggest you take a look at these 3 command line MIDI editing / conversion tools
 

  • midi2abc – A little tool to create MIDI formats to ABC format
  • midi2csv – Conver tour Favourite MIDI files to CSV for educational purposes so see what Channels, Tracks and Time Intervals is a MIDI song mad
  • midicopy – Copy selected, track, channel, time interval of MIDI file to another MIDI file3

 

Well, that's all folks now enjoy your MIDIs and don't forget to donate, as I'm jobless at the moment and the only profit I make is just a few bucks out of advertisement on this blog.
 

Tags: , , , , , , , , , , , , , , , , , , ,
Posted in Curious Facts, Entertainment, Everyday Life, Firefox, Linux, Linux and FreeBSD Desktop, Linux Audio & Video, Linux Backup tools | 1 Comment »

Graphic tool to get Hardware Information on Linux / How to view Hardware Information easy in Linux

Tuesday, October 3rd, 2017

 

 

howto-get-graphically-system-hardware-info-linux-gui-program-for-hardware-recognition-linu

 

IS THERE A GRAPHIC ( GUI ) TOOL TO VIEW HARDWARE INFORMATION ON LINUX?

 


If you are a console maniac like myself, perhaps you never think that you might need anything graphical besides to view hardware information on Linux, but as we're growing older sometimes it becomes much less easier to just use a graphical tool that can show us all the information we need regarding a Notebook / Desktop PC with Linux or even Server machine with enabled Graphical Environment with a brand new installed GNU / Linux whatever version (I hope you don't own server with running Xorg / Gnome / Mate / Xfce etc. as that's pretty much a waste of hardware resource and opens a dozen of other security risks for the server running services ).

 

 

 There are at least 2 ways to quickly check hardware on both PC WorkStation or Server, the easiest and quickest for PC / Notebook Linux users if you have installed GTK libraries or Gnome Desktop Environment is with;
 

LSHW-GTK


LSHW-GTK is simply a GTK frontend over the command line tool for hardware information gathering LSHW
 

HardiInfo

 

HardInfo – is a small application that displays information about your hardware and operating system. Currently it knows about PCI, ISA PnP, USB, IDE, SCSI, Serial and parallel port devices.


1. Howto Install LSHW-GTK / HardInfo on Debian / Ubuntu / Mint GNU / Linux to easy view hardware information


To install both of them on Debian / Ubuntu GNU / Linux, run:
 

apt-get install –yes lshw lshw-gtk hardinfo

 

2. Howto install LSHW-GTK on Fedora, CentOS and OpenSuSE Linux to view easy hardware information

On RedHat RPM based Linux distributions, the package to install is called lshw-gui

Install with yum RPM package manager:
 

yum install –yes lshw lshw-gui  hardinfo


3. Run lshw-gtk / hardinfo

Again, find them and run from GUI environment menus or run manually like in below example:

$ lshw-gtk


graphic-program-to-view-computer-hardware-on-linux-lshw-gtk-on-debian-linux-screenshot-view-hardware-easy-linux1

 

$ hardinfo


hardinfo-a-gui-program-to-view-computer-hardware-info-on-linux-and-freebsd

As you see hardinfo is really interactive and it gives you pretty much all the information, you might need, the only information that was missing at my case and I guess, that would happen to others is information about the SSD Hard Disk, which   180GB

HardInfo is really amazing program as it even includes various common Benchmark Tests and comparison with other Computers:

hardinfo-get-hardware-information-easily-on-linux-and-freebsd-benchmark-info-screenshot-debian-stretch

True that the tests, are pretty simple but still could be useful.

Now run it either from GNOME / Cinnamon (The default graphical environment of Debian Linux) or PLASMA (The new name for the second most popular Linux Graphical Environment – KDE desktop environment)

 

$ lshw


Here is few more screenshots from hardware info reported from my ThinkPad T410 Laptop Running Debian 9 Stretch at the moment.

 

MotherBoard -> BIOS Information

(thatnks God this old but gold Thinkpad T420 business notebook does not run UEFI substitute for BIOS 🙂

graphic-program-to-view-computer-hardware-on-linux-lshw-gtk-on-debian-linux-screenshot-view-hardware-easy-linux2

CPU Information (with all the supported CPU capabilities (extensions)

graphic-program-to-view-computer-hardware-on-linux-lshw-gtk-on-debian-linux-screenshot-view-hardware-easy-linux3

Host Bridge Info

graphic-program-to-view-computer-hardware-on-linux-lshw-gtk-on-debian-linux-screenshot-view-hardware-easy-linux4

Thinkpad BATTERY (45N1005) Info

graphic-program-to-view-computer-hardware-on-linux-lshw-gtk-on-debian-linux-screenshot-view-hardware-easy-linux5

By the way another Way to GUI View your Computer is to just generate HTML from lshw command line tool (as it supports export to HTML), here is how:

 

$ lshw -html > ~/hardware-specs.html


Then just open it with Browser, for example I like GNOME Epiphany browser, so I'll read HTML with it:

 

$ epiphany ~/hardware-specs.html


graphical-software-to-view-hardware-on-linux-lshw-command-to-generate-html-and-view-it-graphically-in-browser-on-home-pc-or-server


The great thing about generating HTML report for hardware is that on Staging / Production / Development servers which you inherited from some other administrator who for some reason (laziness 🙂 ) didn't left necessery documentation, you can easily map the machine hardware and even if it is a group of machines, you can automate report generation for all of them write a short script that parses the data on each of the HTML reports and finally creates a merged document with main important information about hardware of a cluster of computers etc.

If you still want to stick to console run the console version of lshw or use dmidecode or lshw:

 

$ lshw

hipo@jericho:~$ lshw
WARNING: you should run this program as super-user.
jericho                     
    description: Computer
    width: 64 bits
    capabilities: smp vsyscall32
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 7870MiB
     *-cpu
          product: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          size: 891MHz
          capacity: 3500MHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts cpufreq
     *-pci
          description: Host bridge
          product: 2nd Generation Core Processor Family DRAM Controller
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 09
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 09
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:24 ioport:5000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888)
           *-generic UNCLAIMED
                description: Unassigned class
                product: Illegal Vendor ID
                vendor: Illegal Vendor ID
                physical id: 0
                bus info: pci@0000:01:00.0
                version: ff
                width: 32 bits
                clock: 66MHz
                capabilities: bus_master vga_palette cap_list
                configuration: latency=255 maxlatency=255 mingnt=255
                resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:5000(size=128) memory:f1000000-f107ffff
        *-display
             description: VGA compatible controller
             product: 2nd Generation Core Processor Family Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 09
             width: 64 bits
             clock: 33MHz
             capabilities: vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:30 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:6000(size=64) memory:c0000-dffff
        *-communication:0
             description: Communication controller
             product: 6 Series/C200 Series Chipset Family MEI Controller #1
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:27 memory:f3925000-f392500f
        *-communication:1
             description: Serial controller
             product: 6 Series/C200 Series Chipset Family KT Controller
             vendor: Intel Corporation
             physical id: 16.3
             bus info: pci@0000:00:16.3
             version: 04
             width: 32 bits
             clock: 66MHz
             capabilities: 16550 bus_master cap_list
             configuration: driver=serial latency=0
             resources: irq:19 ioport:60b0(size=8) memory:f392c000-f392cfff
        *-network
             description: Ethernet interface
             product: 82579LM Gigabit Network Connection
             vendor: Intel Corporation
             physical id: 19
             bus info: pci@0000:00:19.0
             logical name: enp0s25
             version: 04
             serial: 00:21:cc:cc:b2:27
             capacity: 1Gbit/s
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.13-3 latency=0 link=no multicast=yes port=twisted pair
             resources: irq:25 memory:f3900000-f391ffff memory:f392b000-f392bfff ioport:6080(size=32)
        *-usb:0
             description: USB controller
             product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:16 memory:f392a000-f392a3ff
        *-multimedia
             description: Audio device
             product: 6 Series/C200 Series Chipset Family High Definition Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:29 memory:f3920000-f3923fff
        *-pci:1
             description: PCI bridge
             product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: b4
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode cap_list
             configuration: driver=pcieport
             resources: irq:16
        *-pci:2
             description: PCI bridge
             product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: b4
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:17 memory:f3800000-f38fffff
           *-network
                description: Wireless interface
                product: Centrino Advanced-N 6205 [Taylor Peak]
                vendor: Intel Corporation
                physical id: 0
                bus info: pci@0000:03:00.0
                logical name: wlp3s0
                version: 34
                serial: 26:ad:26:50:f1:db
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=iwlwifi driverversion=4.9.0-3-amd64 firmware=18.168.6.1 ip=192.168.0.102 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                resources: irq:28 memory:f3800000-f3801fff
        *-pci:3
             description: PCI bridge
             product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4
             vendor: Intel Corporation
             physical id: 1c.3
             bus info: pci@0000:00:1c.3
             version: b4
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:19 ioport:4000(size=4096) memory:f3000000-f37fffff ioport:f1800000(size=8388608)
        *-pci:4
             description: PCI bridge
             product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: b4
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:16 ioport:3000(size=4096) memory:f2800000-f2ffffff ioport:f2000000(size=8388608)
           *-generic
                description: System peripheral
                product: MMC/SD Host Controller
                vendor: Ricoh Co Ltd
                physical id: 0
                bus info: pci@0000:0d:00.0
                version: 08
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=sdhci-pci latency=0
                resources: irq:16 memory:f2800000-f28000ff
        *-usb:1
             description: USB controller
             product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:23 memory:f3929000-f39293ff
        *-isa
             description: ISA bridge
             product: QM67 Express Chipset Family LPC Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             resources: irq:0
        *-storage
             description: SATA controller
             product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 04
             width: 32 bits
             clock: 66MHz
             capabilities: storage ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:26 ioport:60a8(size=8) ioport:60bc(size=4) ioport:60a0(size=8) ioport:60b8(size=4) ioport:6060(size=32) memory:f3928000-f39287ff
        *-serial
             description: SMBus
             product: 6 Series/C200 Series Chipset Family SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 04
             width: 64 bits
             clock: 33MHz
             configuration: driver=i801_smbus latency=0
             resources: irq:18 memory:f3924000-f39240ff ioport:efa0(size=32)
     *-scsi
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVDRAM GT50N
             vendor: HL-DT-ST
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/cdrw
             logical name: /dev/dvd
             logical name: /dev/dvdrw
             logical name: /dev/sr0
             version: LT20
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

 

Enjoy Life ! 🙂

Tags: , , , , , , , , , , , , , , , , , , , ,
Posted in Linux, Linux and FreeBSD Desktop, Performance Tuning, System Administration | No Comments »

How to find how much power (electricity) consumption a server or PC has?

Friday, November 2nd, 2012

Kill-A-Watt track system power electricty consumption on GNU / Linux servers and FreeBSD
A friend of mine today ask me if I have clue if it is possible to track his home computer Consumption with some piece of Software?

The question is quite interesting, since I run a home server with Linux and it would have been nice if I can exactly track how much electricity per month it  consumes

Now knowing, the answer I first checked online for some kind of software and all I can find something that does something similar but all can find is powertop.

Though powertop is nice Linux tool to keep an eye which program on PC consumes most from overall consumed electricity and order the programs and modules based on electricity consumption it is not providing information on overall electricity consumption.

As the topic seem to be some interesting, I've decided to ask in irc.freenode.net #deiban
Here is a paste from  irssi channel log:

17:21 < hipodilski> hi any idea, how can I find how much electricity a server conmuses per month
17:21 < hipodilski> is there some some kind of software
17:21 -!- digdilem [~digdilem@plague.digdilem.org] has joined #debian
17:22 < babilen> hipodilski: I would recommend an electricity meter rather than software
17:22 -!- tommy_e [~tommy@81.27.221.202] has quit [Ping timeout: 260 seconds]
17:22 < jelly-home> watt meters ftw
17:22 -!- msx [~msx@190.194.114.10] has joined #debian
17:22 -!- blackshirt [~najwa@103.3.223.5] has left #debian []
17:23 < hipodilski> yes but i don't have electricity metter, if there is software it would be interesting to try it
17:23 -!- badiane [~gdurand@D8FF67fa.cst.lightpath.net] has quit [Remote host closed the connection]
17:23 < xand> hipodilski: no, you need a hardware device.
17:23 < jelly-home> now everything can be solved in software, hipodilski
17:23 < jelly-home> not*
17:23 < jelly-home> dammit
17:23 < xand> unless you have a very fancy PSU, software can't find that out
17:23 < babilen> jelly-home: hehe, nice typo !
17:23 < vacuous> hipodilski yes
17:24 < HelloShitty> nsadmin, are you out of ideas for me?
17:24 < vacuous> there's various devices that do it
17:24 -!- firecode [~irc@unaffiliated/firecode] has joined #debian
17:24 < vacuous> you can either get a killawat which are highly innacurate but it might give you a clue
17:24 < vacuous> and they're very cheap too
17:25 < vacuous> you can get a device which measures your entire houses electric, then you just turn off all the appliances and run the
                 server only
17:25 -!- trysten [~trysten@37-251-103-145.FTTH.ispfabriek.nl] has quit [Quit: be back]
17:25  * babilen likes that approach
17:25 < babilen> But this is getting a bit too off-topic. Maybe hipodilski wants to take it to #debian-offtopic
17:25 < vacuous> or you can keep all fridges on, check what the reading is and then negate that from the total
17:25 < hipodilski> yes thanks 🙂
 

The answer makes it clear right of time of writing this post there is no software for Linux or BSD that keeps track electricity consumption daily or monthly

I've googled to see what is Kill-A-Watt hardware? and found fuzzy named device Kill-A-Watt for sale on ThinkGeek's website for the not so expensive 24.99$

To use Kill-A-Watt device is to be connected inside the power plug and then PC or Server has to be plugged into  Kill-A-Watt dev. I've red also (while researching) many Intelligent UPS devs has support for keeping log of discharged energy, so just buying a good UPS with web administrator or even a cheap one providing statistical information of UPS use via serial port should be another alternative to track ur server consumption.

Tags: , , , , , , , , , , , , , ,
Posted in Linux, Linux and FreeBSD Desktop, System Administration | No Comments »

Linux: /var/log/wtmp – No such file or directory quick fix and why it might be missing on a server

Thursday, May 4th, 2017

fix-var-log-wtmp-btmp-no-such-file-or-directory-linux_last_command-howto-quick-fix

If you have to occasionally log  into some client old inherited (not installed by you) Linux servers on and just out of curiosity and for security sake dediced do a quick security (last user login) evaluation, e.g. issued the
last command just to find out you get the error:

last: /var/log/wtmp: No such file or directory

Perhaps this file was removed by the operator to prevent logging last info.

Then this might be a sure indicator that some malicious script kiddie (hax0r) activity has been run over the server or the ex-system administrator if fired recently decided to wipe out all his login tracks among with installing some other nasty rootkit or backdoor.

Under some circumstances the error might be caused also by badly written end user rotate script bugs (like shell or perl script) bugs or by a buggy deployment of Linux OS virtual machine.
The last: /var/log/wtmp: No such file or directory error is likely to happen on Ubuntu / Debian / Redhat / CentOS Linux distributions running on a Cloud PaaS service such as Amazon EC2, some of the Cloud services vendors do choose to explicitly remove /var/log/wtmp for the reason that many of end customers are using their Linux VM servers (Xen Virtualization / OpenVZ / LXC – Linux Containers) etc. irresponsibly and hence become a victim of script kiddie attacks and the failed logins attempts logged in /var/log/wtmp grow to many gigabytes.

Even some Linux distributions or system administrators of Linux server login hosts that has to keep tens of thousands of  login records monthly or are concentrating on simplicity and on an attempt to reduce size has purposefully deleted the last login entry file /var/log/wtmp file to save space.

But anyways if you happen to be missing this file always bear in mind that you might have been a victim of intrusion and you better run chkrootkit and rkhunter

Run below commands to fix the missing /var/log/wtmp

touch /var/log/wtmp
chmod 0664 /var/log/wtmp
chown root:utmp /var/log/wtmp

On some Linux distributions such as Ubuntu and Fedora you might also want to create /var/log/btmp (which is used to log failed login attempts to server)

touch /var/log/btmp
chmod 0664 /var/log/btmp
chown root:utmp /var/log/btmp

Once the files are created the last command will start logging server in logins and logouts as it is supposed to be again, e.g.:
 

linux:~# last -15
root pts/0 192.168.0.15 Fri May 5 16:41 still logged in
…


This article was inspired by a prior article found on root.bg the site is in Bulgarian so unfortunately you might not be able to read it, but as a content and concept it is pretty similar to www.pc-freak.net, actually the site author Nikolay Nikolov (known in Internet Relay Chat IRC under the pseudonym Joni-B, happened to be an old friend from youth geek IT years 🙂

Enjoy

Tags: , , , , , , , , , , , , , , ,
Posted in Everyday Life, Linux, Linux and FreeBSD Desktop, System Administration | No Comments »

Show directory structure bash script on Linux howto – See hierarchical directory tree structure one liner shell script

Friday, February 24th, 2017

show-directory-structure-see-hierarchical-directory-tree-structure-on-linux-with-tree-command-and-with-bash-shell-scripts

If you have Sys Adminned Linux or *Nix OS like, whether for some shell scripting purpose or just for sake of keeping a backup you should have definitely come
into some need to list a tree of a directories content in a hierarchical order.

The most obvious way to do that on Linux is by simply using:

1.  "tree" command (not installed by default on most Linux distributions so in order to have it on Deb / Debian based Linux do:
 

# apt-get install –yes tree


On Fedora / CentOS Redhat Linux (RHEL) etc. install with:

# yum –yes install tree

 

By the way for those that needs tree on FreeBSD / BSD UNIX, tree is also available on that platform you can install it with:
 

pkg_add -vr tree


Then simply check man tree to get idea on how to use it, the easiest way to use the command tree once package is installed is to run tree inside directory of choice, i.e.

 

$ cd /somedir
$ tree -a

.
├── acpi
│   ├── events
│   │   └── powerbtn-acpi-support
│   └── powerbtn-acpi-support.sh
├── adduser.conf
├── adjtime
├── aliases
├── alternatives
│   ├── ABORT.7.gz -> /usr/share/postgresql/9.5/man/man7/ABORT.7.gz
│   ├── aclocal -> /usr/bin/aclocal-1.11
│   ├── aclocal.1.gz -> /usr/share/man/man1/aclocal-1.11.1.gz
│   ├── ALTER_AGGREGATE.7.gz -> /usr/share/postgresql/9.5/man/man7/ALTER_AGGREGATE.7.gz
│   ├── ALTER_COLLATION.7.gz -> /usr/share/postgresql/9.5/man/man7/ALTER_COLLATION.7.gz
│   ├── ALTER_CONVERSION.7.gz -> /usr/share/postgresql/9.5/man/man7/ALTER_CONVERSION.7.gz
 

 

To get a list of only directories with tree use:
 

$ tree -d /

 

  │   ├── bin
│   │   ├── boot
│   │   │   └── grub
│   │   │       └── locale
│   │   ├── disk
│   │   │   ├── Books
│   │   │   │   ├── 200 E-BOOKS
│   │   │   │   │   ├── McGraw-Hill – Windows Server 2003
│   │   │   │   │   ├── Oreilly.Access.Cookbook.2nd.Edition-LiB
│   │   │   │   │   ├── Oreilly.ActionScript.Cookbook.eBook-LiB
│   │   │   │   │   ├── OReilly.ActionScript.The.Definative.Guide.WinAll.Retail-EAT
│   │   │   │   │   ├── Oreilly.Active.Directory.2nd.Edition.eBook-LiB
│   │   │   │   │   ├── Oreilly.Active.Directory.Cookbook.eBook-LiB
│   │   │   │   │   ├── Oreilly.ADO.Dot.NET.Cookbook.eBook-LiB
│   │   │   │   │   ├── Oreilly.Amazon.Hacks.eBook-LiB
│   │   │   │   │   ├── OREILLY.ANT.THE.DEFINITIVE.GUIDE-JGT
│   │   │   │   │   ├── Oreilly.Apache.Cookbook.eBook-LiB
│   │   │   │   │   ├── Oreilly.AppleScript.The.Definitive.Guide.eBook-LiB
│   │   │   │   │   ├── Oreilly.ASP.Dot.NET.In.A.Nutshell.2nd.Edition.eBook-LiB
│   │   │   │   │   ├── OReilly.Better.Faster.Lighter.Java.Jun.2004.eBook-DDU
│   │   │   │   │   ├── Oreilly.BLAST.eBook-LiB
│   │   │   │   │   ├── OReilly.BSD.Hacks.May.2004.eBook-DDU
│   │   │   │   │   ├── Oreilly.Building.Embedded.Linux.Systems.eBook-LiB
…

If you have a colorful terminal and you like colors for readability the -C option is quite handy

 

$ tree -C /

 

tree-command-linux-hierarchical-structure-directory-tree
 

To list the directory tree with permissions included use tree cmd like so:

 

$ tree -L 2 -p /usr

/usr/
├── [drwxr-xr-x]  bin
│   ├── [-rwxr-xr-x]  [
│   ├── [lrwxrwxrwx]  2to3 -> 2to3-2.6
│   ├── [-rwxr-xr-x]  2to3-2.6
│   ├── [-rwxr-xr-x]  411toppm
│   ├── [-rwxr-xr-x]  7z
│   ├── [-rwxr-xr-x]  7za
│   ├── [-rwxr-xr-x]  a2p
│   ├── [-rwxr-xr-x]  ab
│   ├── [-rwxr-xr-x]  ac
│   ├── [lrwxrwxrwx]  aclocal -> /etc/alternatives/aclocal
│   ├── [-rwxr-xr-x]  aclocal-1.11
│   ├── [-rwxr-xr-x]  acpi


Another truly handy option of tree is to list the directory structure index with included file sizes information

 

$ tree -L 2 -sh /bin

/bin
├── [903K]  bash
├── [147K]  bsd-csh
├── [ 30K]  bunzip2
├── [681K]  busybox
├── [ 30K]  bzcat
├── [   6]  bzcmp -> bzdiff
├── [2.1K]  bzdiff
├── [   6]  bzegrep -> bzgrep
├── [4.8K]  bzexe
├── [   6]  bzfgrep -> bzgrep
├── [3.6K]  bzgrep
├── [ 30K]  bzip2
├── [ 14K]  bzip2recover
├── [   6]  bzless -> bzmore
├── [1.3K]  bzmore
├── [ 51K]  cat
├── [ 59K]  chgrp
├── [ 55K]  chmod
├── [ 63K]  chown
├── [ 10K]  chvt
├── [127K]  cp
├── [134K]  cpio
├── [  21]  csh -> /etc/alternatives/csh
├── [104K]  dash


To list a directory tree of a search pattern, lets say all files with .conf extensions use:
 

$ tree -P *.conf

/etc/ca-certificates.conf [error opening dir]
/etc/dante.conf [error opening dir]
/etc/debconf.conf [error opening dir]
/etc/deluser.conf [error opening dir]
/etc/discover-modprobe.conf [error opening dir]
/etc/fuse.conf [error opening dir]
/etc/gai.conf [error opening dir]
/etc/gpm.conf [error opening dir]
/etc/gssapi_mech.conf [error opening dir]
/etc/hdparm.conf [error opening dir]
/etc/host.conf [error opening dir]
/etc/idmapd.conf [error opening dir]
/etc/inetd.conf [error opening dir]
/etc/insserv.conf [error opening dir]
/etc/irssi.conf [error opening dir]
/etc/kernel-img.conf [error opening dir]
/etc/ld.so.conf [error opening dir]
/etc/libao.conf [error opening dir]
/etc/libaudit.conf [error opening dir]
/etc/logrotate.conf [error opening dir]
/etc/memcached.conf [error opening dir]
/etc/mke2fs.conf [error opening dir]
/etc/mongodb.conf [error opening dir]
/etc/mtools.conf [error opening dir]
/etc/multitail.conf [error opening dir]
/etc/nsswitch.conf [error opening dir]
/etc/ntp.conf [error opening dir]
/etc/ocamlfind.conf [error opening dir]

 

 

tree -I option does exclude all petterns you don't want tree to list

Here are few other tree useful options:

  • tree -u /path/to/file – displays the users owning the files
  • tree -g /path/to/file – display the groups owning the files
  • tree -a /path/to/file – display the hidden files/folders
  • tree -d /path/to/file – display only the directories in the hierarchy


However there might be some cases where you have to support a Linux server or you just have to write a script for a non-root user and you might not have the permissins to install the tree command to make your life confortable. If that's the case then you can still use a couple of command line tools and tricks (assuming you have permissions) to list a log a directory / files and subdirectories tree structure in a hierarchical tree like command order

2. Print a list of all sub-directories and files within a directory tree

To print all directories within any path of choise on a server use
 

$ find /path/ -type d -print
…

 

To print all files within a root filesystem hierarchically with find command

Another way to do it in a more beautiful output is by using find in conjunction with awk
 

$ find . -type d -print 2>/dev/null|awk '!/\.$/ {for (i=1;i<NF;i++){d=length($i);if ( d < 5  && i != 1 )d=5;printf("%"d"s","|")}print "—"$NF}'  FS='/'

 

|—bashscripts
|          |—not-mine
|          |—various
|          |—output
|          |—examples
|          |—fun
|          |—educational
|          |—backdoor-cgi
|          |—fork-bombs
|          |—tmp
|          |    |—old
|          |—bullshits
|—packages
|       |—ucspi-ssl-0.70.2
|       |               |—package
|       |               |—compile
|       |               |      |—rts-tmp
|       |               |—command
|       |               |—src
|—bin
|—package
|      |—host
|      |    |—superscript.com
|      |    |              |—command
|—mnt
|    |—tmpfs
|    |—disk
|    |—flash_drive
|    |—ramfs
|    |—cdrom

3. Get a list of the directories on filesystem structure with one-liner ls + sed script
 

$ ls -R | grep ":$" | sed -e 's/:$//' -e 's/[^-][^\/]*\//–/g' -e 's/^/ /' -e 's/-/|/'

 

 |-bin
 |-boot
 |-dev
 |—net
 |—pts
 |-downloads
 |—autorespond-2.0.5
 |—–debian
 |—deb-packages
 |—–IP-Country-2.28
 |——-bin
 |——-blib
 |———arch
 |———–auto
….
 

4. Print all files within root filesystem and issue any command on each of the files
 

ls -R1 / |    while read l; do case $l in *:) d=${l%:};; "") d=;; *) echo "$d/$l";; esac; done


Above command just prints all the found files with full-path if you want to check the file size or file type you just check echo command with any command you need to execute on each of the listed file

5. Get a list hierarchical directory Linux tree with bash shell scripts: Assuming that the server where you need to have a list of the directory filesystem structure in a tree fashion has bash you could use this little script called tree.sh to do the job or for a full filesystem hierarchical tree like directory structure use fulltree.sh

Tags: , , , , , , , , ,
Posted in Everyday Life, Linux, System Administration, Various | No Comments »

Drawing GANTT Charts and Project Management on Linux, (Microsoft Project substitute for Unix)

Tuesday, October 12th, 2010

I'm studying Project Management, right now. In that spirit of thoughts I and a couple of other guys are building a Project Plan.
As it Project Plan it's necessary to put a GANTT Chart in it to show visually the project timeline (the phases), the duration and the inter-relation between the different tasks which leads the project to an actual completion.

After a bit of thorough research online on available software to deal with project management and particularly, ones that are capable to build a GANTT charts on Linux / BSD.

I've come with the following list of software capable to be a substitute for the Microsoft Project software.
Redmine GANTT Chart

GANTT chart Redmine

1. Gantt Project
GANTTProject chart GANTTProject Chart

2. Gnome Planner
Planner GANTT Gnome Chart Planner GANTT Chone Chart

3. Task Juggler Project Manager with GANTT Capability for (KDE)
Task Juggler

4. JxProject – This software is not free, though it can be considered almost free
Take a look also at:
5. Trac , though it doesn't really support GANTT charts it's a lovely software to be used for PM.
Trac Project Management

Another option you have is to try out:
6. PHProjekt

Update 20.09.2016 – PHPProject Old download link is no longer active

It is this link http://www.phprojekt.com/, but the page doesn’t seem to be active any more. I thought you might want to update.

If you are looking for an alternative please check out http://wiht.link/PHProjekt-PM, it may make a suitable replacement.

Kind Regards,
Tom Wilcox


That piece of softwre really looks promising, especially if we consider that it's web based and how much essential is today to have an anline tools for doing the ordinary desktop jobs.

You can even check an online demo of the PHPProjekt software here

If you're a type of KDE user you definitely has to try out Kplato

As I've tested the software the software is easy to be used, however it still is missing some essential parts that Microsoft Project includes so it's not 100% substitute.
Also it's not able to open Microsoft Project (MPP) files, neither able to save the charts in the .mpp format.

Moving ahead I've came across DotProject DotProject Gantt Chart
DottProject Gantt Chart

I haven't took the time to test it myself but however, as I go through the software website the project looked quite good.
Lastly you can take a look at: 7. PStricks as a mean of project management, however I think it doesn't support GANTT chart building.
>

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Posted in Business Management, Curious Facts, Everyday Life, Linux | 1 Comment »

Thursday, July 14th, 2016

use-remote-dns-on-mozilla-firefox-howto-windows-linux-logo.svg

If you're using Mozilla Firefox browser to browse the Web with Traffic Tunneling via SSH Tunnel to your own Linux server like I do in order to prevent yourself traffic to be sniffed from your Work corporate computer (as most of the corporations such as IBM / Hewlett Packard / Concentrix etc. are forcing all employee PC traffic to be  to be transported via default set Windows Corporate Proxy active for all browsers.

Then you will certainly also want to prevent the DNS requests to be not logged somewhere in your Corporate IT department thus the question arises:

How to force DNS requests to be made through the Proxy server (SSH host)?

Nomatter where you're using Firefox browser with advanced proxying plugin such as FoxyProxy FF add-on or the default Proxy FF features the DNS lookups might end up in Corporate set DNS servers often forced for the computer / notebook and impossible to be changed to a custom ones as many of the Corporation internal Sharepoints and domains are only visible from their internal networks.

Thanksfully in newer versions there is an easy way to do it directly from Visual menus via:

Tools -> Options -> Advanced -> Network -> Settings

You will get a screen like below:
 

firefox-use-proxy-remote-dns-howto-screenshot

Just tick the Remote DNS and that will force Firefox to query remote Proxy server proxy DNS

 

If you happen to be running older Firefox which doesn't have the Remote DNS tick you can also try to set the setting manually:

 

  1. In firefox type this in your address bar:

    about:config

  2. Click I'll be careful I  promise.

  3. In the filter textbox, type: proxy

  4. Find the preference name called *network.proxy.socks_remote_dns*. Double click it to set it to true.

    i-will-be-careful-i-promise-firefox-windows-screenshot-warranty


network-proxy-socks-remote_dns-firefox-screenshot

Enjoy ! 🙂

Tags: , , , , , , , , ,
Posted in Curious Facts, Everyday Life, Firefox, Various, Windows | No Comments »

How to extract /export Images from .docx Word Document on Linux / BSD

Monday, April 11th, 2016

how-to-extract-export-images-pictures-from-docx-microsoft-word-office-document-on-linux-bsd-unix-with-unzip
If you're a Linux user and you have to write some scripts for websites to extract all Images /Pictures from Microsoft Word .docx document then you'll probably wonder if  there is a (Linux) command-line tool to extract all the images from a MS Word .docx document?

For websites or even for scripting purposes extracting .docx on Linux / UNIX OS is really a great thing to do.

The good news is MS .docx format is simply a ZIP Archive file format, so you can straight away unzip and pick up all the contained image .JPG / .PNG / .GIF whatever Graphic files bundled.

To list the content of a sample .docx on Linux you will hence need to have installed unzip command line tool, if you still haven't install it either with yum (on RHEL / CentOS / Fedora)
 

 

[root@centos ~]:# yum -y install unzip
…

 

Or with apt-get on (Debian / Ubuntu / Mint):

 

debian-linux:~# apt-get install –yes unzip

 

Once installed to get a list of .docx MS Word file:

 

debian-linux:~# unzip -l your-file-name-of-choice.docx

Archive: your-file-name-of-choice.docx
  Length      Date    Time    Name
———  ———- —–   —-
     4333  1980-01-01 00:00   [Content_Types].xml
      737  1980-01-01 00:00   _rels/.rels
     4117  1980-01-01 00:00   word/_rels/document.xml.rels
   462177  1980-01-01 00:00   word/document.xml
     2984  1980-01-01 00:00   word/footer1.xml
     1487  1980-01-01 00:00   word/header2.xml
     1351  1980-01-01 00:00   word/header3.xml
     1556  1980-01-01 00:00   word/header4.xml
     1756  1980-01-01 00:00   word/header1.xml
     2390  1980-01-01 00:00   word/footer2.xml
     1432  1980-01-01 00:00   word/footer3.xml
     1629  1980-01-01 00:00   word/footnotes.xml
     1623  1980-01-01 00:00   word/endnotes.xml
     1449  1980-01-01 00:00   word/header5.xml
   306540  1980-01-01 00:00   word/media/image5.jpeg
     5564  1980-01-01 00:00   word/media/image2.png
     5593  1980-01-01 00:00   word/media/image4.png
     8050  1980-01-01 00:00   word/media/image3.png
     6992  1980-01-01 00:00   word/theme/theme1.xml
     5537  1980-01-01 00:00   word/media/image1.png
      685  1980-01-01 00:00   word/glossary/_rels/document.xml.rels
    10300  1980-01-01 00:00   word/glossary/document.xml
    12341  1980-01-01 00:00   word/settings.xml
     3390  1980-01-01 00:00   word/glossary/settings.xml
      677  1980-01-01 00:00   docProps/core.xml
     1380  1980-01-01 00:00   docProps/custom.xml
     1000  1980-01-01 00:00   docProps/app.xml
      335  1980-01-01 00:00   customXml/itemProps2.xml
      296  1980-01-01 00:00   customXml/_rels/item4.xml.rels
      296  1980-01-01 00:00   customXml/_rels/item3.xml.rels
….

 

  

As you can see from above output .docx files media files are always stored under "word/media/*" file structure folder.
Therefore to not extract all .xml .rels files from .docx but only pick up the picture files:

 

debian-linux:~# unzip  your-file-name-of-choice.docx "word/media/*"

 

Archive:  your-file-name-of-choice.docx
 extracting: word/media/image5.jpeg
 extracting: word/media/image2.png
 extracting: word/media/image4.png
 extracting: word/media/image3.png
 extracting: word/media/image1.png


In case you need  to gather only some specific files format from the Word .docx document, issue:

 

[root@centos ~:]# unzip your-file-name-of-choice.docx "*.jpeg"
…

 

Or if you just need the .xmls extensions

 

[root@centos ~:]# unzip your-file-name-of-choice.docx "*.xml"

 

If you need to extract pictures from older .doc (2003) MS file format you will first need to convert .doc file to .docx and then you can use unzip to extract the files you need.

Unfortunately I'm not aware how to convert .doc to docx with a tool if somebody knows share in comment.
Perhaps it is possible with unoconv or abiword.

The closest thing I know is how to convert .doc Word document to PDF:

 

abiword –to=pdf filename.doc

 

Tags: , , , , , , , , , , , , , , , , ,
Posted in Curious Facts, Everyday Life, File Convert Tools, Linux | No Comments »

« Older Entries
Newer Entries »