Posts Tagged ‘clear’

Enormous Scandal in the Bulgarian Orthodox Church continues as the Bulgarian Orthodox Church Holy Synod acts as Masonic Lodge not venerating the people’s choice about future Metropolitan of the Eparchy

Thursday, April 25th, 2024

The times of the Second Coming of Jesus Christ seem to be really near, this is clear from the facts that the corruption and people's degradation has reached a state, where no truthfulness is existing neither in the worldly organizations Countries, governments, parliaments, courts, institutions, companies and even in the Most Holy Church of Christ which he has consecrated by his Holy Blood, through the Crucifixion and Death on the Cross for our sins. 
 

It seems today, neither the low ordinary people neither the high and eligible and most honored Bishops and even Metropolitans are in a such a bad careless state, that they only care about their own wordly interests and the interests of a few of other servitudes nearby, neglecting the interest of the Holy Church of Christ (which is the Assembly of believers in the Lord Christ Jesus, who breath and live being in the world but , “My kingdom is not of this world. If My kingdom were of this world, My servants would fight, so that I should not be delivered to the Jews; but now My kingdom is not from here.” John 18:36.

What happens now about 2000 years, later in Christ Church is absotely the same. Just like Jesus, his true followers has been rejected to be accepted by his own people. In same way his true people are always, being rejected to take their ruling place, but instead in the world the Lies and manipulations are taking place to crucify the true servents of God.

The Holy Gospel seems to repeat itself again and again all the time through the ages. This time the stage is different this is not ancient Israel with the Assembly of Synodrion and the Old Testament's Church of God and his People the Israelites. But the Holy Synod of the Bulgarian Church and the Bulgarian Orthodox Church with his people the new Israel the Christians.

Get to know the facts on Bulgarian Church Scandal Escalasion for New Metropolitan of Sliven voting – situation as of 24th April 2024

The Holy Synod of the Bulgarian Church  has made another and strange untransparent decision once again, right after the Enormous Scandal with the cassation of legal choice of People of Sliven for best candidates Ierotey and Mihail (amongs which Ierotey is preferred), as the Metropolia of Sliven is still mourining on the beloved pontiff his holiness Metropolitan Ioanikij, less than 3 months before his blessed passing to Christ.

prayer-for-the-Soul-fo-His-Holiness-Metropolitan-Ioanikij

The decision of Eparchal voters among which nuns, monks (archimandrites), priests and layman was cleartly to have Metropolitan to have Ierotey as a first and most wanted candidate and Mihail as a second that was made on 18 of February (Eparchy voters in Sliven elected the two bishops, of whom St. The Synod will elect a new Metropolitan of Sliven.

Dioceses_of_the_Bulgarian_Orthodox_Church_Sliven_Eparchy

Map of Spiritual Eparchies in Bulgaria of Bulgarian Orthodox Church Bulgarian Patriarchy (BPC-BP)
Sliven_Diocese_spiritual_regions-map

Territorial Map of Sliven Eparchy according to the Local Spiritual districts belonging to Sliven Metropoly

Shortly after, it was decided to stop the legal procedure for choosing between bishop Ierotey and bishop Michail and overwritte the Synod accepted and agreed own legal document to follow on different church casuses,  the ' the Church statuses regulations (Устав на БПЦ Българска Патриаршия = Bulgarian Orthodox Church Regulation Rules document decided to be followed by everyone in the Church including the bishops and metropolitans on a National Church Assembly) right during a procedure for enthronization of next Metropolitan of Sliven.

The new "regulation" they tried to push "in the shadows (illegally against the Church statues)" was written in a way to make the choice of new Metropolitans to be done only by Metropolitan assembly the Synod, without taking in considerating the christian people preference for such, something scandal as this was not so during the last 150 years since we have restored the Bulgarian Church Excharchy.

 For more see whole case described in Enormous Church Scandal in the Bulgarian Orthodox Church on the selection of new Metropolitan for one of Biggest Church Eparchies the Eparchy of Sliven.

Out of this a great number of discussions started by Christian laity in facebook, viber and in the media of multitude of people, priests and cleargy from Sliven Eparchy complaining and protesting first infront of the Metroplitan Palace in Sliven

Prayer-Vigil-peaceful-protests-in-front-of-Sliven-Metropolia
Sliven Church Priests, Monks and Layman gathered in front of Sliven Eparchy Metropolitan governing building

As this protests were not considered seriously by many of Elders of the Synod, the same protest with much more participant occured in front of Synodal Palace (the ruling ministry of the Bulgarian Church seat place) in Sofia as well as purely physical by presence with Prayer Vigils to the Holy Synod because of their unwillingness to accept the Synod unargumented decision to stop the procedure for choice of new metropolitan.

Unofficially it was was said the reason behind the solution is accusation against Ierotey and Michail for being involved in unwaful selling of Church lands. These facts were publicly checked by documents (see them here) presented by the court clearly prooving the accusations of two brother priests Silvester and Evgeny (which has a history of being involved in many anti-church activities and scandals) are fake.

Bishop Mihail has also been accused by others for the same illegal church land resell activities, and he came with official answer on the Bulgarian Orthodox Church (official site) see the document here.

Prayer-Vigil-Protest-in-front-of-Holy-Synod

Peaceful objection Vigil Prayer in front of Holy Synod by Sliven Clergy and Laymen, Poster reads:
"Do not exchange our Good shepherd, which gives his soul for the sheep with a mercenary, we do not know !"
Second Poster on the background is "Against the New Order", meant the new Order to not venerate People's choice during voting of new Metropolitans

Prayer-Vigil-in-front-of-Holy-Synod-by-Sliven-Priests-and-Clergy

The outcome of the protest in front of the Synodal bulding palace in Sofia, Bulgaria was to cancel the votings for Metropolitan and do the whole voting procedure from the beginning.
The people accepted the decision of the Synod even though the synod took this decision to not put in place 'new order' in favour if existing norms of the Churh statuses on the background of multitude of protesting priests, monks and layman from Sliven Eparchy and other eparchies which is well documented well in below video.

Synodal Prayer Vigil against the cassation of choice for future Metropolitan of Sliven

On the protests along with Church people and clergy from Sliven was present people from other Eparchies as well as key well known priests and monks that are from Sofia and the Sofia Metropolitan to tell their unwillingness for overriding the Church established rules "Statuses", as well as to express their support for Sliven Eparchy whose Church people will is to have venerated their up to the rules selection of Bishop Ierotey to become the next Vicar (Metropolitan) of Sliven.

On many TV medias this protest was not shown and the organized fake "contra-protest" of Metropolitan Nikolay and his people who were anti-protesting against people will was shown as it was paid for that (another proof for lack of enough freedom of speech and transparency of Bulgarian mass medias).

holy-synod-contraprotest-for-the-choice-of-new-sliven-metropolitan

The contra-protesters from Plovdvid Eparchy that came with buses from Plovdiv eparchy enforced by Metropolitan Nikolay, very much in the old spirit of manifestations during the totalitarian regime of communism (notice the obviousness of the protest is fake from the exactly same looking slogans held mainly by priests)

As a result people from Sliven Eparchy accepted the fact that the Holy Synod decided to finally cassate (cancel) the procedure for choice of new Sliven Metropolitan and organize a new list of Worthy and dostopochteni (venerable) Bishops among which Sliven's people should make the choice again.
The people accepted this as they hoped the Holy Synod elders, might have been misled by the false accusation reports of the two brother priests Silvester and Evgeny Yanakievi (who by the way are very active on facebook) against Ierotey, and thus by organizing the choice once again officially the choice will take case in a transparent way and according to the Church rules statuses and then they can again vote for bishop Ierotey and double verify their initial choice.

However what happened now is far from that. Contrary to any logic (and as provocation), the list of venerable Bishops was made by the Holy Synod, during the Great Lent on 22 of April, a time in which people should concentrate on their repentance and spiritual growing and spiritual preparation to accept the Fest of Feasts, The Resurresction of Christ Easter.

Contrary and again unvenerating the Church clergy and people's will of Sliven the new list of Bishops does not included neither Ierotey nor Mihail and included only 6 Bishops claimed to be venerable !!!


1. Velichki Bishop Sionij
2. Znepolski Bishop Arsenij
3. Melnishki Bishop Gerasim
4. Branitcki Bishop Pahomij
5. Glavnicki Bishop Makarij
6. Velbyzdhski Bishop Isaak

 

Here is a tiny biographies and only few rumored things about the Bishops, synod have been included and listed them according to seniority on when they become bishops. 

1. The first listed Bishop Sionij (Velichki) completed Cherepish Spiritual Seminary (Academy) in 1990. Become monk in 1991.
Completed Theology in 1994 in Saint Kliment Ohridski. 1995-1996 specialezed in Erlangen Germany. Become monk from Metropolitan Dometian (Vidinski) in Klisurski Monastery soon after become hieromonk. In 1992 – 1995 has been abbot of Klisura Monastery. In 1996 has become deacon of Sofia's Theological Seminary Saint John of Rila (he was later removed because of scandals, a boy died and accused by pupil parents for pedophilia, a sad fact that was hidden with time, due to many publications you can find online …). 
In 1998 has been raised to archimandrite by Patriarch Maxim in Dolni Lozen Monastery St. Peter and Paul.
In March 2007 has been ordinated as Bishop Velichki in Saint Alexander Nevski Cathedral. In 2009 become vicar of Vidin Metropolitan Dometian In 1 May 2014 become an abbot of Troyan monastery, 3rd April 2019 he has become an abbot also to Bachkovo Monastery.
Bishop Sionij is among the most scandalous persons in Bulgarian Orthodox Church, many  media scandals assigning his name tо pedophilia and homosexuality through the time. It is claimed by medias he is involved with mafia (and especially with Church mafia). There was even a person who says to have been involved in this affairs with him that publicly has given interview for "Tzanov"'s self financed youtube channel Napred i Nagore"  (video titled: "The Church of Sin").
Currently paradoxically he is an abbot of 2 of the biggest and 2 second richest monasteries in Bulgaria Troyanski and Bachkovki.. His family is known in Sofia for years for being one of the most richest people in Sofia.
Currently aged 56 yrs.

2. Second one Arsenij gruaded high school 2006 in Stara Zagora in village Osetenovo. Completed Saint John of Rila seminary in 2006, was student in Saint Ohridski Theology and continued his education in Plovdiv  University, saint Paisios of Hilendar, said to have graduated 2009. Tonsured monk in 2007, became hierodeacon and consequentially same year 2008 hieromonk. 6th December he was raised by Metr. Nikolay to Bishop. He has been a director of Plovdiv's Orthodox  TV since 2009 and Plovdiv Seminary 2010 (seminary initiated again by by Metr. Nikolay). In 2012 he was given to be a head of Metropolitan cathedral in Plovdvid saint Marina.
On June 2014 he was raised to bishop after offer was to the Holy Synod, by Metr. Nikolay. 
Hierotony was made by then very old Metropolitan Ioanikiy of Sliven in collaboration with Metropolitans Dometian of Vidinsky (now deceased), Grigoriy of Velikotarnovsky, Ignatius of Pleven and Nikolay of Plovdiv.

Iinterestingly he is titled as protegee of Metr. Nikolay who orchestrates the decisions in the Holy Synod for the last years (fact known by most people who even had a slight idea of what is going on internally in the Church). The backstage ruling of the Synod and the place is said to be easy for the Metr. Nikolay, since patriarch Neofit was severely sick and in practice inactive as patriarch. According to official information that leaked from Synod, it was exactly Arsenij the choice of Metr. Nikolay and his group of metropolitans (most of whom doesn't have the necessery support from anyone such as DS (Dyrzhavna Sigurnost) to which Metr. Nikolay is said to have the support and in which Metr. Nikolay's father was important ranked person). Thus according to different medias the legative choice of Sliven people was cancelled by the Synod by Metr. Nikolay and his group in attempt to install the already pre-chosen Arsenij in any means.

Bishop Arsenij  is known amoung the clergy in Church for becoming a bishop officially against the Church statuses, not having the Statuses set fulfilled years, becoming bishop before his 30s in 28 years, according to Church rules of statuses regulations of BPC-BP he should have had been at least 35 years, 2 more years than Christs age of crucifix. The other break of Church statuses regulations with his hierotony was that he did not have 10 years as a clergy person in Bulgarian Orthodox Church.
Currently 37 yrs old (has 10 years served as Bishop)

3. Bishop Gerasim (Melnishki) is famous for having a professional Actors education, before deciding to become monk and start his new career in the Church. He has not have officially any Theological Education diploma till the moment he decided to walk the spiritual path, but received such by specialization in Moscow 2 years in a newly created faculty by Metropolitan Ilarion Alfeev (faculty created 2012) and no longer existing. The Diplomas from Russia are not really considered officially by Bulgarian Government due to legislative reasons. Even though that he managed to be chosen somehow and become the Secretary of Holy Synod, and have signed documents that he has a higher Theological education which he at that time doesn't. He seemed to have served as a head of saint Alexander Nevsky and in this service  
He is said by some medias to have closed his eyes and signed the documents for requirements of higher education for the job of Synodal Secratary as a preliminary to the function of Secratary. He is known to often serve Liturgy in the Russian Church among which was a lot of scandals last year and which kept closed for quite some time, due to clergy in the Russian Church Clergy in (Sofia) Bulgaria being accused for serving for FSB (Russian Secret Services). He is also accused by  medias for organizing an official business dinner  for donation to collect money from businessmen for the sake of restoration of  Biggest Cathedral in Bulgaria St. Alexander Nevsky. It should be said his service in saint Alexander Nevsky as a head of it for some years was okay, no big scandals like the previous head archim. Dionisij Mishev.
Have to say it is strange why such a cathedral as Saint Alexander Nevsky, has to collect donations for its restoration, especially since the Bulgarian church Sofia Metropoly has a lot of land properties and stores on the city center that given for rent and should be bringing money to mitropoly along with the so called "vladichnina" amount of whole profit which every Church on territory of eparchy has to pay to the metropoly, especially as the Church st. Alexander Nevsky is a common tourist destination in Sofia for people all around the world and that should be supposably another way to collect money for its restoration. He is neither famous nor infamous and that is perhaps his main places of service was Saint Alexander Nevsky and as Synodal Secretary.
Currently he is aged 44 yrs. Served as Bishop 8 yrs.

4. Bishop Pahomij (Branicki) has been made a monk and hieromonk  again by Metr. Nikolay, his elder was proto-abbot Benedict from Holy Mount Athos Zograph in Divotinski Monastery, near Bankya in 2002 in 2004 he become abbot of Divotinsky Monastery. For 2004 till 2010 he had managed to gather brotherhood and helped to recover a Chapel Saint Anna and rerecover the 70 Apostles Church buildings and the Main Church Holy Trinity (which is considered his greatest achievements) his fame amount the Orthodox christian youth has been positive as he managed to have a good charisma and attract young people in his monastery during his abbotship. In 2015 he become hieromonk.
bishop (hierotony by current Metropolitan of Vratza and some other bishops who is temporary substitute for patriarch Neofit's passing till the new choice of patriarch completes.). In 12.06.2017 he was made a bishop in Rila Monastery, again – according to some sources he did not have the Higher Theological education at that time for the post of bishopship, requirement according to Statuses of Bulgarian Orthodox Church. Currently he is aged 45 yrs. Served as Bishop 7 yrs

5. bishop Makarij (Glavnicki) has completed Plovdiv's Spiritual Seminary (whose deacan at that time was Bishop Evlogij Adrianopolski), finished Theology school in Bucharest in 2004 and Master degree in Thessaloniki (Solun) completed in 2010. In march 2007 become a novice monk in Rila Monastery Saint John of Rila. In 2008 during Lent become Hierodeacon, by bishop Evlogij. April 2011 become a hieromonk (priest monk). In March 2017 become a bishop. After becoming metropolitan he is now a vicar Bishop of Metropolitan Naum. He is perhaps among the most educated bishops of Bulgarian Church at present. Due to his studies in Greece, some people which play a kind of rloe of 'whisle-blower' but also do distribute some false mirrors, he might be a man of the Ecumenical patriarch.
It is interesting fact that his hierotony as bishop did not happen in Saint John of Rila monastery but in Troyan Monastery (The Old Practice of Bulgarian Orthodox Church was to create new bishops in the Capital Sofia in Saint Alexander Nevsky – nowadays changed – some speculate this is done to escape from the anaxios (unworthy) that someone might scream during the services of new hierotony to stop the ceremony). In Troyan monastery as of time of writting this article the abbot is bishop Sionij Velichki. Also it is a bit strange the person who pushed his career forward Bishop Evlogij of Rila Monastery did not take part in the hierotony in Troyan monastery.
Current aged 42 yrs. Serves as Bishop 7 yrs

6. Bishop Isaak (Velbyzhdski), started and completed aged 13 in Saint John of Rila seminary in Sofia, which he complated in 2001. In 2001 he started working in Seminary administration. Completed Sofia, Theological School saint Kliment Ohridski in 2008 (Bachelor). In 2009 in Vidin he become monk by Dometian of Vidin under spiritual guidance of Biship Sionij Velichki. In 2010, was raised to hieromonk in Saint Nicolas Church and in parallel works in Sofia Seminary as а tutor (ethnical bulgarians living abroad).
In 2011, with blessing of Metr. Dometian he has become episcopal vicar of Lom Spiritual district. In 2012 in Dormition of Theotokos Chapel (which he headed) he was raised to archimandrite. In 2012 he started studying postgraduate studies in Moscow. In June 2023 he was raised to bishop with the title Bishop Velbyzhdski and given the role of second patriarch Neofit's vicar, as first is Bishop Polikarp. According to rumors, he is said according to some media news to have some connections with FSB due to his studies in Russia (and the common Russians practice to try to recruit their students to work for Russian agencies). Also according to some medias he had public appearance speach, staying behind Russia's official position for holy war, held against the evil (Russia as a Third Rome idea which currently Russian Church embraces).
Serves as Bishop 1 yr


Bishop Ierotey Agathopolski (Kosakov)

The Seventh Bishop that is excluded from list, Ierotey (Agathopolski) was selected by Sliven Eparchy Priest, Monks and Laity
to become the 7th Metropolitan of Sliven is Ierotey (The Voice of the People, The Voice of God) !

Bishop Ierotey (Agathopolski) in 2003  completed, Parallel course of Sofia Theological Seminary. December 22, 2003, Metropolitan Ioannikiy (Nedelchev) of Sliven tonsured him as a monk in brotherhood of the Holy Great Martyr George in the city of Pomorie.
Archimandrite Theodosius (abbot of) Pomorie monastery at that time became his spiritual mentor. 
May 11, 2004, Metropolitan Ioanikiy of Sliven in the Church of Saints Cyril and Methodius in Burgas ordained hierodeacon.
On May 16 of the same year, Metropolitan Ioanikiy of Sliven in the Church of the Most Holy Theotokos in Nessebar was ordained to the rank of hieromonk.
On January 1, 2005, he was appointed abbot of the Monastery of the Holy Great Martyr George in Pomorie.
He made a significant contribution to the development of the Pomorie monastery and its influence on Christian life in the region.
Christian children's camps were organized annually at the monastery, a week of Orthodox singing introduced. Many hopeless and lonely and people with problems found a hospitality and spiritual help and resort in the monastery.
On May 6, 2008 he was elevated to the rank of archimandrite. In 2010 he graduated  Master Degree of Theology of Shumen University, Bishop Konstantin Preslavsky. 
September 18, 2014, by decision of the Holy Synod of the Bulgarian Orthodox Church, he was elected vicar of the Sliven diocese, bishop with the title of Agathopol (Agathopolski).
October 1 was chiratonized to Bishop rank by Metropolitan Ioanikij (Nedelchev) Slivenski, Metropolitan Grogorij (Stefanov) of Tarnovo, Metropolitan Starozagorsky Galaktion (Tabakov), Metropolitan Nikolay Plovdivsky (Sevastyanov), Metropolitan Ambrosij (Ambrosius) Dorostolsky (Parashkevov), Metropolitan of Nevrokop Seraphim (Dinkov), Bishop of Trayanopol Cyprian (Kazandzhiev), Bishop of Znepol Arseniy (Lazarov).
Served as Bishop 10 years


I believe there is nearly no person who has even encountered to meet Ierotey (Kosakov) Bishop Ierotey and interacted and doesn't have a good memory of that time, or have some bad impression.
Not that I know him presonally but that person has always tried to help everyone in everything, this is really rare in our mostly egoistical world. Perhaps only envious and people obsessed with money or material goods can criticize him for the reason, he lives a true monk, and as every true monk and as Saint John of Rila adviced in His Covenant, "From all the things, most beware of money, for they are the root of all evil.".

It happens Slivens Eparchy is full of material goods due to its strategic location nearby see and due to tourism, and of course this eparchy is interested to be at the hands of businesses who can built freely and sell for cheap to big investors lands for the sake of increasement of tourism in the region, as Bishop Ierotey might be a factor against that (as he has refused to cooparete in building of 200 rooms Hotel accomodation at lands of Pomorie Monastery to Silvester Yanakiev, now there are some people leading fierce company to remove him from the vote and destroy his good name reputation.).

From the Holy Synod, there is no official explanation on why Bishop Ierotey is removed from the vote list during the new choice, but for everyone who has even the slightest idea of what is going on in the Church higher stages of power it is fully clear.

The wing of Metropolitan Nikolay and his protegees Metropolitans has risen their voices against the inclusion of Ierotey in the list. In order to make it not clear that Ierotey is the real target, few others were also removed who were in practice "un-votable" as their personal life has spots.

This just like the first time of decision to halt the process of voting even thugh two candidates for metropolitan were chosen (none of which that seems to fit the desires of the Dark Cardinal of the Bulgarian Church Metr. Nikolay and his synodal group of dependent people who are kept silent and obedient due to compromates against them or with financial donations).

It is not secret and not new the backstage dictation of Metropolitan Nikolay to his band (Synodal wing) of bishops many of whom are known to have a lot of homosexual (homophilia) and even pedophilia  and other abnormal sexual activities, as well as activities related to the dark business schemes in bulgarian businesses and money laundary for which people know from mouth to mouth information spreading for years in the Church.

What is now stunning is that these people has become so unscrupulous, that they're ready to get over any person or group of people and even against a whole Eparchy of the Bulgarian Orthodox Church that perhaps nominally might be around 1 million people !!!

These peoples's believe, that us the ordinary believers of the Bulgarian Orthodox Church are stupid and easily managable and they can do with them whatever they want because they're a higher class and very few of people are really regularly going to Church or actively parcipating in the Church Mysteries (Holy Communion and the other 7 sacraments).

What is striking, the Synodal elders are shameless, they think they're the Church, forgetting the word Ecclesia meaning.

"Ecclesia (or Ekklesia) in Christian theology means both: a particular body of faithful people, and the whole body of the faithful."

Seems like now our many of our Synodal Elders understand the Church (Ecclesia) as them and the servitude of faithful to Christ people who should obey them for the only reason, they have taken the seat of the Holy Apostles (that is the metropolitan seat = bishopship seat + administrative obediences).

It is interesting to say the modern understanding of Ecclesia in Western Modern Catholicism does well fit the understanding that the powerful of the day in the Synod that are trying to push out their agendas against the people will and choice, below is a definition.
 

Christian understanding of Church
 

If one speaks of the whole body of Christian faithful, then there are included not only the members of the Church who are alive on earth but all who were members of the church before. Some churches therefore describe the Church as being composed of the Church Militant (Christians on Earth) and the Church Triumphant (Christians in Heaven). In Catholic theology, there is also the Church Suffering (Christians still in purgatory).

The Christian family, the most basic unit of Church life, is sometimes called the domestic Church.[2]

Finally, 'The Church' may sometimes be used, especially in Catholic theology, to speak of those who exercise the office of teaching and ruling the faithful, the Ecclesia Docens, or again (more rarely) the governed as distinguished from their pastors, the Ecclesia Discens.
 

What else is really not Okay with how the selection of Bishops are reduced from 10 to 6 venerable to take the seat of Sliven Metropolitan
 

All this events happen during the Great Lent and for every True Christian it is well known the old Church practice, that important decisions should not be taken during the great Lent period as usually such decisions are wrong and could create havoc, due to the highest degree of temptations that are let around by the Almighty God for the spiritual grow and healing of his faithful childs the Christians.

It is up to Christian people to now proof them once the Great Lent is over after the Glorious Resurrection Day they're wrong and that people will not let the God given eparchy of Sliven to be ruled by dependent Metropolitan to Metr. Nikolay.

It is up to us to proof we're not sheepsand that people's will on matters of higher hierarchy of Church and their deeds should not be unmonitored and unpunished as it was in a higher degree over the last years !!!

People should rise of their indifference and show they still care about the Pureness of the Church and the legitimity of the Church Law of Selection of new Highest Hierarchical heads of the Church.
It is last time and last chances until we still have Church, especially considering the Apocalyptic times in which we seem to be living.

If you dear brothers and sisters in Christ not react and not fight for the truthful selection of a list with really venerable bishops that is transparent and argumented as it should be, another satellite Metropolitan will be installed to fit the plans of the ex-communist DS (Dyrzhavna Sigurnost) and the Ruling elite. If that happens soon we'll not only have a Real Orthodox Church Hierarchy chosen according to canons and due to Church Statues as it should be but an Assembly of Pseudo Hierarchs who acts in secrecy and conspiracy schemes in the same way as any Masonic Lodge.

In other words, we'll have Church but a faked artificial business and party like organization, where decisions are not taken by the Creator of the Church the Lord Jesus Christ and his true followers the Apostles (that are the Bishops and Metropolitans), but we'll have a secular organization with Big beauty Church temple (museums without real cleargy) and a Monasteries full of pedophiles, gays and people who want to live an easy life and enjoy themselves instead of spiritually persevere and lead the hard spiritual fight and pray for the well-being of Bulgarians, Bulgaria and the Rest of the Christians.

Lets pray fervently until the end of the fasting, that the Metropolitans who took that bad decision will change their mind and put back in the list the real venerable people and not have a list of people who are dependent and unworthy due to lack of Higher education, a personal scandals, they were involved like Bishop Sionij or have another kind of spots, that can be easily researched even by a simple few Internet searches in Google.

Nomatter who is worthy or not, the main thing is that Sliven Eparchy should be headed by a person who is wanted in the Eparchy and such person according to the clear votes of Eparchical electors is Ierotey, the problem is that Ierotey is not playing well with the dark businesses and does count the interest of people, and does not randomly do what is being asked for with the only goal to make money and he doesn't follow blindly rules by Metr. Nikolay or whoever else that is not working for the good of True Church of Christ (the assembly of all people believing in Jesus Christ as we theEastern Orthodox believe) and thus he is automatically becoming unworthy. As worthy is considered those who serves the Business and the Internet of the powerful authorities of this day.

 

ipmitool: Reset and manage IPMI (Intelligent Platform Management Interface) / ILO (Integrated Lights Out) remote board on Linux servers

Friday, December 20th, 2019

ipmitool-how-to-get-information-about-hardware-and-reset-ipmi-bmc-linux-access-ipmi-ilo-interface-logo

As a system administration nomatter whether you manage a bunch of server in a own brew and run Data Center location with some Rack mounted Hardware like PowerEdge M600 / ProLiant DL360e G8 / ProLiant DL360 Gen9 (755258-B21) or you're managing a bunch of Dedicated Servers, you're or will be faced  at some point to use the embedded in many Rack mountable rack servers IPMI / ILO interface remote console board management. If IPMI / ILO terms are new for you I suggest you quickly read my earlier article What is IPMI / IPKVM / ILO /  DRAC Remote Management interfaces to server .

hp-proliant-bl460c-ILO-Interface-screenshot

HP Proliant BL460 C IPMI (ILO) Web management interface 

In short Remote Management Interface is a way that gives you access to the server just like if you had a Monitor and a Keyboard plugged in directly to server.
When a remote computer is down the sysadmin can access it through IPMI and utilize a text console to the boot screen.
The IPMI protocol specification is led by Intel and was first published on September 16, 1998. and currently is supported by more than 200 computer system vendors, such as Cisco, Dell, Hewlett Packard Enterprise, Intel, NEC Corporation, SuperMicro and Tyan and is a standard for remote board management for servers.

IPMI-Block-Diagram-how-ipmi-works-and-its-relation-to-BMC
As you can see from diagram Baseboard Management Controllers (BMCs) is like the heart of IPMI.

Having this ILO / IPMI access is usually via a Web Interface Java interface that gives you the console and usually many of the machines also have an IP address via which a normal SSH command prompt is available giving you ability to execute diagnostic commands to the ILO on the status of attached hardware components of the server / get information about the attached system sensors to get report about things such as:

  • The System Overall heat
  • CPU heat temperature
  • System fan rotation speed cycles
  • Extract information about the server chassis
  • Query info about various system peripherals
  • Configure BIOS or UEFI on a remote system with no monitor / keyboard attached

Having a IPMI (Intelligent Platform Management Interface) firmware embedded into the server Motherboard is essential for system administration because besides this goodies it allows you to remotely Install Operating System to a server without any pre-installed OS right after it is bought and mounted to the planned Data Center Rack nest, just like if you have a plugged Monitor / Keyboard and Mouse and being physically in the remote location.

IPMI is mega useful for system administration also in case of Linux / Windows system updates that requires reboot in which essential System Libraries or binaries are updated and a System reboot is required, because often after system Large bundle updates or Release updates the system fails to boot and you need a way to run a diagnostic stuff from a System rescue Operating System living on a plugged in via a USB stick or CD Drive.
As prior said IPMI remote board is usually accessed and used via some Remote HTTPS encrypted web interface or via Secure Shell crypted session but sometimes the Web server behind the IPMI Web Interface is hanging especially when multiple sysadmins try to access it or due to other stuff and at times due to strange stuff even console SSH access might not be there, thansfully those who run a GNU / Linux Operating system on the Hardware node can use ipmitool tool http://ipmitool.sourceforge.net/ written for Linux that is capable to do a number of useful things with the IPMI management board including a Cold Reset of it so it turns back to working state / adding users / grasping the System hardware and components information health status, changing the Listener address of the IPMI access Interface and even having ability to update the IPMI version firmware.

Prior to be able to access IPMI remotely it has to be enabled usually via a UTP cable connected to the Network from which you expect it to be accesible. The location of the IPMI port on different server vendors is different.

ibm-power9-server-ipmi

IBM Power 9 Server IPMI port

HP-ILO-Bladeserver-Management-port-MGMT-yellow-cabled

HP IPMI console called ILO (Integrated Lights-Out) Port cabled with yellow cable (usually labelled as
Management Port MGMT)

Supermicro-SSG-5029P-E1CTR12L-Rear-Annotated-dedicated-IPMI-lan-port

Supermicro server IPMI Dedicated Lan Port

 

 In this article I'll shortly explain how IPMITool is available and can be installed and used across GNU / Linux Debian / Ubuntu and other deb based Linuxes with apt or on Fedora / CentOS (RPM) based with yum etc.

 

1. Install IPMITool

 

– On Debian

 

# apt-get install –yes ipmitool 

 

– On CentOS

 

# yum install ipmitool OpenIPMI-tools

 

# ipmitool -V
ipmitool version 1.8.14

 

On CentOS ipmitool can run as a service and collect data and do some nice stuff to run it:

 

[root@linux ~]# chkconfig ipmi on 

 

[root@linux ~]# service ipmi start

 

Before start using it is worthy to give here short description from ipmitool man page
 

DESCRIPTION
       This program lets you manage Intelligent Platform Management Interface (IPMI) functions of either the local system, via a kernel device driver, or a remote system, using IPMI v1.5 and IPMI v2.0.
       These functions include printing FRU information, LAN configuration, sensor readings, and remote chassis power control.

IPMI management of a local system interface requires a compatible IPMI kernel driver to be installed and configured.  On Linux this driver is called OpenIPMI and it is included in standard  dis‐
       tributions.   On Solaris this driver is called BMC and is included in Solaris 10.  Management of a remote station requires the IPMI-over-LAN interface to be enabled and configured.  Depending on
       the particular requirements of each system it may be possible to enable the LAN interface using ipmitool over the system interface.

 

2. Get ADMIN IP configured for access

https://3.bp.blogspot.com/-jojgWqj7acg/Wo6bSP0Av1I/AAAAAAAAGdI/xaHewnmAujkprCiDXoBxV7uHonPFjtZDwCLcBGAs/s1600/22-02-2018%2B15-31-09

To get a list of what is the current listener IP with no access to above Web frontend via which IPMI can be accessed (if it is cabled to the Access / Admin LAN port).

 

# ipmitool lan print 1
Set in Progress         : Set Complete
Auth Type Support       : NONE MD2 MD5 PASSWORD
Auth Type Enable        : Callback : MD2 MD5 PASSWORD
                        : User     : MD2 MD5 PASSWORD
                        : Operator : MD2 MD5 PASSWORD
                        : Admin    : MD2 MD5 PASSWORD
                        : OEM      :
IP Address Source       : Static Address
IP Address              : 10.253.41.127
Subnet Mask             : 255.255.254.0
MAC Address             : 0c:c4:7a:4b:1f:70
SNMP Community String   : public
IP Header               : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
BMC ARP Control         : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP      : 10.253.41.254
Default Gateway MAC     : 00:00:0c:07:ac:7b
Backup Gateway IP       : 10.253.41.254
Backup Gateway MAC      : 00:00:00:00:00:00
802.1q VLAN ID          : 8
802.1q VLAN Priority    : 0
RMCP+ Cipher Suites     : 1,2,3,6,7,8,11,12
Cipher Suite Priv Max   : aaaaXXaaaXXaaXX
                        :     X=Cipher Suite Unused
                        :     c=CALLBACK
                        :     u=USER
                        :     o=OPERATOR
                        :     a=ADMIN
                        :     O=OEM

 

 

3. Configure custom access IP and gateway for IPMI

 

[root@linux ~]# ipmitool lan set 1 ipsrc static

 

[root@linux ~]# ipmitool lan set 1 ipaddr 192.168.1.211
Setting LAN IP Address to 192.168.1.211

 

[root@linux ~]# ipmitool lan set 1 netmask 255.255.255.0
Setting LAN Subnet Mask to 255.255.255.0

 

[root@linux ~]# ipmitool lan set 1 defgw ipaddr 192.168.1.254
Setting LAN Default Gateway IP to 192.168.1.254

 

[root@linux ~]# ipmitool lan set 1 defgw macaddr 00:0e:0c:aa:8e:13
Setting LAN Default Gateway MAC to 00:0e:0c:aa:8e:13

 

[root@linux ~]# ipmitool lan set 1 arp respond on
Enabling BMC-generated ARP responses

 

[root@linux ~]# ipmitool lan set 1 auth ADMIN MD5

[root@linux ~]# ipmitool lan set 1 access on

 

4. Getting a list of IPMI existing users

 

# ipmitool user list 1
ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
2   admin1           false   false      true       ADMINISTRATOR
3   ovh_dontchange   true    false      true       ADMINISTRATOR
4   ro_dontchange    true    true       true       USER
6                    true    true       true       NO ACCESS
7                    true    true       true       NO ACCESS
8                    true    true       true       NO ACCESS
9                    true    true       true       NO ACCESS
10                   true    true       true       NO ACCESS


– To get summary of existing users

# ipmitool user summary
Maximum IDs         : 10
Enabled User Count  : 4
Fixed Name Count    : 2

5. Create new Admin username into IPMI board
 

[root@linux ~]# ipmitool user set name 2 Your-New-Username

 

[root@linux ~]# ipmitool user set password 2
Password for user 2: 
Password for user 2: 

 

[root@linux ~]# ipmitool channel setaccess 1 2 link=on ipmi=on callin=on privilege=4

 

[root@linux ~]# ipmitool user enable 2
[root@linux ~]# 

 

6. Configure non-privilege user into IPMI board

If a user should only be used for querying sensor data, a custom privilege level can be setup for that. This user then has no rights for activating or deactivating the server, for example. A user named monitor will be created for this in the following example:

[root@linux ~]# ipmitool user set name 3 monitor

 

[root@linux ~]# ipmitool user set password 3
Password for user 3: 
Password for user 3: 

 

[root@linux ~]# ipmitool channel setaccess 1 3 link=on ipmi=on callin=on privilege=2

 

[root@linux ~]# ipmitool user enable 3

The importance of the various privilege numbers will be displayed when  ipmitool channel  is called without any additional parameters.

 

 

[root@linux ~]# ipmitool channel
Channel Commands: authcap   <channel number> <max privilege>
                  getaccess <channel number> [user id]
                  setaccess <channel number> <user id> [callin=on|off] [ipmi=on|off] [link=on|off] [privilege=level]
                  info      [channel number]
                  getciphers <ipmi | sol> [channel]

 

Possible privilege levels are:
   1   Callback level
   2   User level
   3   Operator level
   4   Administrator level
   5   OEM Proprietary level
  15   No access
[root@linux ~]# 

The user just created (named 'monitor') has been assigned the USER privilege level. So that LAN access is allowed for this user, you must activate MD5 authentication for LAN access for this user group (USER privilege level).

[root@linux ~]# ipmitool channel getaccess 1 3
Maximum User IDs     : 15
Enabled User IDs     : 2

User ID              : 3
User Name            : monitor
Fixed Name           : No
Access Available     : call-in / callback
Link Authentication  : enabled
IPMI Messaging       : enabled
Privilege Level      : USER

[root@linux ~]# 

 

7. Check server firmware version on a server via IPMI

 

# ipmitool mc info
Device ID                 : 32
Device Revision           : 1
Firmware Revision         : 3.31
IPMI Version              : 2.0
Manufacturer ID           : 10876
Manufacturer Name         : Supermicro
Product ID                : 1579 (0x062b)
Product Name              : Unknown (0x62B)
Device Available          : yes
Provides Device SDRs      : no
Additional Device Support :
    Sensor Device
    SDR Repository Device
    SEL Device
    FRU Inventory Device
    IPMB Event Receiver
    IPMB Event Generator
    Chassis Device


ipmitool mc info is actually an alias for the ipmitool bmc info cmd.

8. Reset IPMI management controller or BMC if hanged

 

As earlier said if for some reason Web GUI access or SSH to IPMI is lost, reset with:

root@linux:/root#  ipmitool mc reset
[ warm | cold ]

 

If you want to stop electricity for a second to IPMI and bring it on use the cold reset (this usually
should be done if warm reset does not work).

 

root@linux:/root# ipmitool mc reset cold

 

otherwise soft / warm is with:

 

ipmitool mc reset warm

 

Sometimes the BMC component of IPMI hangs and only fix to restore access to server Remote board is to reset also BMC

 

root@linux:/root# ipmitool bmc reset cold

 

9. Print hardware system event log

 

root@linux:/root# ipmitool sel info
SEL Information
Version          : 1.5 (v1.5, v2 compliant)
Entries          : 0
Free Space       : 10240 bytes
Percent Used     : 0%
Last Add Time    : Not Available
Last Del Time    : 07/02/2015 17:22:34
Overflow         : false
Supported Cmds   : 'Reserve' 'Get Alloc Info'
# of Alloc Units : 512
Alloc Unit Size  : 20
# Free Units     : 512
Largest Free Blk : 512
Max Record Size  : 20

 

 ipmitool sel list
SEL has no entries

In this particular case the system shows no entres as it was run on a tiny Microtik 1U machine, however usually on most Dell PowerEdge / HP Proliant / Lenovo System X machines this will return plenty of messages.

ipmitool sel elist

ipmitool sel clear

To clear anything if such logged

ipmitool sel clear

 

10.  Print Field Replaceable Units ( FRUs ) on the server 

 

[root@linux ~]# ipmitool fru print
 

 

FRU Device Description : Builtin FRU Device (ID 0)
 Chassis Type          : Other
 Chassis Serial        : KD5V59B
 Chassis Extra         : c3903ebb6237363698cdbae3e991bbed
 Board Mfg Date        : Mon Sep 24 02:00:00 2012
 Board Mfg             : IBM
 Board Product         : System Board
 Board Serial          : XXXXXXXXXXX
 Board Part Number     : 00J6528
 Board Extra           : 00W2671
 Board Extra           : 1400
 Board Extra           : 0000
 Board Extra           : 5000
 Board Extra           : 10

 Product Manufacturer  : IBM
 Product Name          : System x3650 M4
 Product Part Number   : 1955B2G
 Product Serial        : KD7V59K
 Product Asset Tag     :

FRU Device Description : Power Supply 1 (ID 1)
 Board Mfg Date        : Mon Jan  1 01:00:00 1996
 Board Mfg             : ACBE
 Board Product         : IBM Designed Device
 Board Serial          : YK151127R1RN
 Board Part Number     : ZZZZZZZ
 Board Extra           : ZZZZZZ<FF><FF><FF><FF><FF>
 Board Extra           : 0200
 Board Extra           : 00
 Board Extra           : 0080
 Board Extra           : 1

FRU Device Description : Power Supply 2 (ID 2)
 Board Mfg Date        : Mon Jan  1 01:00:00 1996
 Board Mfg             : ACBE
 Board Product         : IBM Designed Device
 Board Serial          : YK131127M1LE
 Board Part Number     : ZZZZZ
 Board Extra           : ZZZZZ<FF><FF><FF><FF><FF>
 Board Extra           : 0200
 Board Extra           : 00
 Board Extra           : 0080
 Board Extra           : 1

FRU Device Description : DASD Backplane 1 (ID 3)
….

 

Worthy to mention here is some cheaper server vendors such as Trendmicro might show no data here (no idea whether this is a protocol incompitability or IPMItool issue).

 

11. Get output about system sensors Temperature / Fan / Power Supply

 

Most newer servers have sensors to track temperature / voltage / fanspeed peripherals temp overall system temp etc.
To get a full list of sensors statistics from IPMI 
 

# ipmitool sensor
CPU Temp         | 29.000     | degrees C  | ok    | 0.000     | 0.000     | 0.000     | 95.000    | 98.000    | 100.000
System Temp      | 40.000     | degrees C  | ok    | -9.000    | -7.000    | -5.000    | 80.000    | 85.000    | 90.000
Peripheral Temp  | 41.000     | degrees C  | ok    | -9.000    | -7.000    | -5.000    | 80.000    | 85.000    | 90.000
PCH Temp         | 56.000     | degrees C  | ok    | -11.000   | -8.000    | -5.000    | 90.000    | 95.000    | 100.000
FAN 1            | na         |            | na    | na        | na        | na        | na        | na        | na
FAN 2            | na         |            | na    | na        | na        | na        | na        | na        | na
FAN 3            | na         |            | na    | na        | na        | na        | na        | na        | na
FAN 4            | na         |            | na    | na        | na        | na        | na        | na        | na
FAN A            | na         |            | na    | na        | na        | na        | na        | na        | na
Vcore            | 0.824      | Volts      | ok    | 0.480     | 0.512     | 0.544     | 1.488     | 1.520     | 1.552
3.3VCC           | 3.296      | Volts      | ok    | 2.816     | 2.880     | 2.944     | 3.584     | 3.648     | 3.712
12V              | 12.137     | Volts      | ok    | 10.494    | 10.600    | 10.706    | 13.091    | 13.197    | 13.303
VDIMM            | 1.496      | Volts      | ok    | 1.152     | 1.216     | 1.280     | 1.760     | 1.776     | 1.792
5VCC             | 4.992      | Volts      | ok    | 4.096     | 4.320     | 4.576     | 5.344     | 5.600     | 5.632
CPU VTT          | 1.008      | Volts      | ok    | 0.872     | 0.896     | 0.920     | 1.344     | 1.368     | 1.392
VBAT             | 3.200      | Volts      | ok    | 2.816     | 2.880     | 2.944     | 3.584     | 3.648     | 3.712
VSB              | 3.328      | Volts      | ok    | 2.816     | 2.880     | 2.944     | 3.584     | 3.648     | 3.712
AVCC             | 3.312      | Volts      | ok    | 2.816     | 2.880     | 2.944     | 3.584     | 3.648     | 3.712
Chassis Intru    | 0x1        | discrete   | 0x0100| na        | na        | na        | na        | na        | na

 

To get only partial sensors data from the SDR (Sensor Data Repositry) entries and readings

 

[root@linux ~]# ipmitool sdr list 

Planar 3.3V      | 3.31 Volts        | ok
Planar 5V        | 5.06 Volts        | ok
Planar 12V       | 12.26 Volts       | ok
Planar VBAT      | 3.14 Volts        | ok
Avg Power        | 80 Watts          | ok
PCH Temp         | 45 degrees C      | ok
Ambient Temp     | 19 degrees C      | ok
PCI Riser 1 Temp | 25 degrees C      | ok
PCI Riser 2 Temp | no reading        | ns
Mezz Card Temp   | no reading        | ns
Fan 1A Tach      | 3071 RPM          | ok
Fan 1B Tach      | 2592 RPM          | ok
Fan 2A Tach      | 3145 RPM          | ok
Fan 2B Tach      | 2624 RPM          | ok
Fan 3A Tach      | 3108 RPM          | ok
Fan 3B Tach      | 2592 RPM          | ok
Fan 4A Tach      | no reading        | ns
Fan 4B Tach      | no reading        | ns
CPU1 VR Temp     | 27 degrees C      | ok
CPU2 VR Temp     | 27 degrees C      | ok
DIMM AB VR Temp  | 24 degrees C      | ok
DIMM CD VR Temp  | 23 degrees C      | ok
DIMM EF VR Temp  | 25 degrees C      | ok
DIMM GH VR Temp  | 24 degrees C      | ok
Host Power       | 0x00              | ok
IPMI Watchdog    | 0x00              | ok

 

[root@linux ~]# ipmitool sdr type Temperature
PCH Temp         | 31h | ok  | 45.1 | 45 degrees C
Ambient Temp     | 32h | ok  | 12.1 | 19 degrees C
PCI Riser 1 Temp | 3Ah | ok  | 16.1 | 25 degrees C
PCI Riser 2 Temp | 3Bh | ns  | 16.2 | No Reading
Mezz Card Temp   | 3Ch | ns  | 44.1 | No Reading
CPU1 VR Temp     | F7h | ok  | 20.1 | 27 degrees C
CPU2 VR Temp     | F8h | ok  | 20.2 | 27 degrees C
DIMM AB VR Temp  | F9h | ok  | 20.3 | 25 degrees C
DIMM CD VR Temp  | FAh | ok  | 20.4 | 23 degrees C
DIMM EF VR Temp  | FBh | ok  | 20.5 | 26 degrees C
DIMM GH VR Temp  | FCh | ok  | 20.6 | 24 degrees C
Ambient Status   | 8Eh | ok  | 12.1 |
CPU 1 OverTemp   | A0h | ok  |  3.1 | Transition to OK
CPU 2 OverTemp   | A1h | ok  |  3.2 | Transition to OK

 

[root@linux ~]# ipmitool sdr type Fan
Fan 1A Tach      | 40h | ok  | 29.1 | 3034 RPM
Fan 1B Tach      | 41h | ok  | 29.1 | 2592 RPM
Fan 2A Tach      | 42h | ok  | 29.2 | 3145 RPM
Fan 2B Tach      | 43h | ok  | 29.2 | 2624 RPM
Fan 3A Tach      | 44h | ok  | 29.3 | 3108 RPM
Fan 3B Tach      | 45h | ok  | 29.3 | 2592 RPM
Fan 4A Tach      | 46h | ns  | 29.4 | No Reading
Fan 4B Tach      | 47h | ns  | 29.4 | No Reading
PS 1 Fan Fault   | 73h | ok  | 10.1 | Transition to OK
PS 2 Fan Fault   | 74h | ok  | 10.2 | Transition to OK

 

[root@linux ~]# ipmitool sdr type ‘Power Supply’
Sensor Type "‘Power" not found.
Sensor Types:
        Temperature               (0x01)   Voltage                   (0x02)
        Current                   (0x03)   Fan                       (0x04)
        Physical Security         (0x05)   Platform Security         (0x06)
        Processor                 (0x07)   Power Supply              (0x08)
        Power Unit                (0x09)   Cooling Device            (0x0a)
        Other                     (0x0b)   Memory                    (0x0c)
        Drive Slot / Bay          (0x0d)   POST Memory Resize        (0x0e)
        System Firmwares          (0x0f)   Event Logging Disabled    (0x10)
        Watchdog1                 (0x11)   System Event              (0x12)
        Critical Interrupt        (0x13)   Button                    (0x14)
        Module / Board            (0x15)   Microcontroller           (0x16)
        Add-in Card               (0x17)   Chassis                   (0x18)
        Chip Set                  (0x19)   Other FRU                 (0x1a)
        Cable / Interconnect      (0x1b)   Terminator                (0x1c)
        System Boot Initiated     (0x1d)   Boot Error                (0x1e)
        OS Boot                   (0x1f)   OS Critical Stop          (0x20)
        Slot / Connector          (0x21)   System ACPI Power State   (0x22)
        Watchdog2                 (0x23)   Platform Alert            (0x24)
        Entity Presence           (0x25)   Monitor ASIC              (0x26)
        LAN                       (0x27)   Management Subsys Health  (0x28)
        Battery                   (0x29)   Session Audit             (0x2a)
        Version Change            (0x2b)   FRU State                 (0x2c)

 

12. Using System Chassis to initiate power on / off / reset / soft shutdown

 

!!!!!  Beware only run this if you know what you're realling doing don't just paste into a production system, If you do so it is your responsibility !!!!! 

–  do a soft-shutdown via acpi 

 

ipmitool [chassis] power soft

 

– issue a hard power off, wait 1s, power on 

 

ipmitool [chassis] power cycle

 

– run a hard power off

 

ipmitool [chassis] power off

 
– do a hard power on 

 

ipmitool [chassis] power on

 

–  issue a hard reset

 

ipmitool [chassis] power reset


– Get system power status
 

ipmitool chassis power status

 

13. Use IPMI (SoL) Serial over Lan to execute commands remotely


Besides using ipmitool locally on server that had its IPMI / ILO / DRAC console disabled it could be used also to query and make server do stuff remotely.

If not loaded you will have to load lanplus kernel module.
 

modprobe lanplus

 

 ipmitool -I lanplus -H 192.168.99.1 -U user -P pass chassis power status

ipmitool -I lanplus -H 192.168.98.1 -U user -P pass chassis power status

ipmitool -I lanplus -H 192.168.98.1 -U user -P pass chassis power reset

ipmitool -I lanplus -H 192.168.98.1 -U user -P pass chassis power reset

ipmitool -I lanplus -H 192.168.98.1 -U user -P pass password sol activate

– Deactivating Sol server capabilities
 

 ipmitool -I lanplus -H 192.168.99.1 -U user -P pass sol deactivate

 

14. Modify boot device order on next boot

 

!!!!! Do not run this except you want to really modify Boot device order, carelessly copy pasting could leave your server unbootable on next boot !!!!!

– Set first boot device to be as BIOS

ipmitool chassis bootdev bios

 

– Set first boot device to be CD Drive

ipmitool chassis bootdev cdrom 

 

– Set first boot device to be via Network Boot PXE protocol

ipmitool chassis bootdev pxe 

 

15. Using ipmitool shell

 

root@iqtestfb:~# ipmitool shell
ipmitool> 
help
Commands:
        raw           Send a RAW IPMI request and print response
        i2c           Send an I2C Master Write-Read command and print response
        spd           Print SPD info from remote I2C device
        lan           Configure LAN Channels
        chassis       Get chassis status and set power state
        power         Shortcut to chassis power commands
        event         Send pre-defined events to MC
        mc            Management Controller status and global enables
        sdr           Print Sensor Data Repository entries and readings
        sensor        Print detailed sensor information
        fru           Print built-in FRU and scan SDR for FRU locators
        gendev        Read/Write Device associated with Generic Device locators sdr
        sel           Print System Event Log (SEL)
        pef           Configure Platform Event Filtering (PEF)
        sol           Configure and connect IPMIv2.0 Serial-over-LAN
        tsol          Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
        isol          Configure IPMIv1.5 Serial-over-LAN
        user          Configure Management Controller users
        channel       Configure Management Controller channels
        session       Print session information
        dcmi          Data Center Management Interface
        sunoem        OEM Commands for Sun servers
        kontronoem    OEM Commands for Kontron devices
        picmg         Run a PICMG/ATCA extended cmd
        fwum          Update IPMC using Kontron OEM Firmware Update Manager
        firewall      Configure Firmware Firewall
        delloem       OEM Commands for Dell systems
        shell         Launch interactive IPMI shell
        exec          Run list of commands from file
        set           Set runtime variable for shell and exec
        hpm           Update HPM components using PICMG HPM.1 file
        ekanalyzer    run FRU-Ekeying analyzer using FRU files
        ime           Update Intel Manageability Engine Firmware
ipmitool>

 

16. Changing BMC / DRAC time setting

 

# ipmitool -H XXX.XXX.XXX.XXX -U root -P pass sel time set "01/21/2011 16:20:44"

 

17. Loading script of IPMI commands

# ipmitool exec /path-to-script/script-with-instructions.txt  

 

Closure

As you saw ipmitool can be used to do plenty of cool things both locally or remotely on a server that had IPMI server interface available. The tool is mega useful in case if ILO console gets hanged as it can be used to reset it.
I explained shortly what is Intelligent Platform Management Interface, how it can be accessed and used on Linux via ipmitool. I went through some of its basic use, how it can be used to print the configured ILO access IP how
this Admin IP and Network configuration can be changed, how to print the IPMI existing users and how to add new Admin and non-privileged users.
Then I've shown how a system hardware and firmware could be shown, how IPMI management BMC could be reset in case if it hanging and how hardware system even logs can be printed (useful in case of hardware failure errors etc.), how to print reports on current system fan / power supply  and temperature. Finally explained how server chassis could be used for soft and cold server reboots locally or via SoL (Serial Over Lan) and how boot order of system could be modified.

ipmitool is a great tool to further automate different sysadmin tasks with shell scrpts for stuff such as tracking servers for a failing hardware and auto-reboot of inacessible failed servers to guarantee Higher Level of availability.
Hope you enjoyed artcle .. It wll be interested to hear of any other known ipmitool scripts or use, if you know such please share it.

How to clear ARP cache on Linux / Windows for a single IP address / Flush All IPs ARP cache

Wednesday, December 11th, 2019

linux-how-to-delete-modify-arp-cache-entries-after-IP-is-migrated-from-one-server-or-VPN-host-to-another-resized

On times of Public Internet IP migration or Local IPs between Linux servers or especially in clustered Linux Application Services running on environments like Pacemaker / Corosync / Heartbeat with services such as Haproxy.
Once an IP gets migrated due to complex network and firewall settings often the Migrated IP from Linux Server 1 (A) to Linux Server 2 (B) keeps time until a request to reload the Internet server IP ARP cache with to point to the new IP location, causing a disruption of accessibility to the Newly configured IP address on the new locations. I will not get much into details here what are the ARP (Address Resolution protocol) and Network ARP records on a Network attached Computer and how they correspond uniquely to each IP address assigned on Ethernet or Aliased network Interfaces (eth0 eth0:1 eth0:2) . But in this article, I'll briefly explain once IP Version 4 address is migrated from one server Data Center location to another DC, how the unique corresponding ARP record kept in OS system memory should be flushed in the ARP corresponding Operating System so called ARP table (of which you should think as a logical block in memory keeping a Map of where IP addresses are located physically on a Network recognized by the corresponding Unique MAC Address.
 

1. List the current ARP cache entries do

Arp is part of net-tools on Debian GNU / Linux and is also available and installed by default on virtually any Linux distribution Fedora / CentOS / RHEL / Ubuntu / Arch Linux and even m$ Windows NT / XP / 2000 / 10 / whatever, the only difference is Linux tool has a bit of more functionality and has a bit more complex use.
Easiest use of arp on GNU / Linux OS-es is.
 

# arp -an 

sample-IP-address-list-with-the-assigned-ARP-cache-mac-addresses
The -a lists all records and -n flag is here to omit IP resolving as some IPs are really slow to resolve and output of command could get lagged.

2. Delete one IP entry from the cache


Assuming only one IP address was migrated, if you want to delete the IP entry from local ARP table on any interface:
 

# arp -d 192.168.0.8


It is useful to delete an ARP cached entry for IP address only on a certain interface, to do so:
 

# /usr/sbin/arp -i eth1 -d 10.0.0.1

 

3. Create ARP entry MAC address with a static one for tightened security


A useful Hack is to (assign) / bind specific Static MAC addresses to be static in the ARP cache, this is very useful to improve security and fight an ARP poisoning attacks.
Doing so is pretty easy, to do so:

Above will staticly make IP 192.168.0.8 to always appear in the ARP cache table to the MAC 00:50:ba:85:85:ca. So even if we have another system with the same MAC
trying to spoof our location and thus break our real record location for the Hostname in the network holding in reality the MAC 00:50:ba:85:85:ca, poisoning us
trying to make our host to recognize 192.168.0.8 to a different address this will not happen as the static ARP will be kept unchanged in ARP caching table.

 

 # arp -s 192.168.0.8 00:50:ba:85:85:ca

 

4. Flush all ARP records only for specific Ethernet Interface


After the IP on interface was migrated run:

 

# ip link set arp off dev eth0 ; ip link set arp on dev eth0

 

5. Remove a set of few IPs only migrated ARP cache entries

 

# for i in 192.168.0.1 10.0.0.1 172.168.0.3; do sudo arp -d $i; done


Once old ARP entries are removed the arp command would return as:

 

linux:~$ arp
? (192.168.0.8) at <incomplete>  on eth1
? (172.168.0.3) at <incomplete>  on eth2


The 192.168.0.8 / 172.168.0.3 entry now shows as incomplete, which means the ARP entry will be refreshed when it is needed again, this would also depend
on the used network switches / firewalls in the network settings so often could take up to 1 minute or so..

 

6. Flush all ARP table records on Linux

flush-all-arp-cache-addresses-on-linux-howto-with-ip-command

 

# ip -s -s neigh flush all

 

7. Delete ARP Cache on FreeBSD and other BSDs

# arp -d -a 

 

8.  Flush arp cache on Windows

Run command prompt as Administrator -> (cmd.exe)  and do:

C:\> ipconfig /all
netsh interface ip delete arpcache

 

9. Monitoring the arp table


On servers with multiple IP addresses, where you expect a number of IP addresses migrated to change it is useful to use watch + arp like so:
 

# watch -n 0.1 'arp -an'

The -n 0.1 will make the arp -an be rerun every 10 miliseconds and by the way is a useful trick to monitor stuff returned by commands that needs a higher refresh frequency.
 

Conclusion


In short in this article, was explained how to list your arp cache table.The arp command is also available both on Linux and Windows) and as integral part of OS networking it is useful to check thoroghfully to its man page (man arp).
Explained was how to create Static ARP table records to prevent ARP poisoning attacks on a server.
I went through how to delete only a single ARP records (in case if) only certain IPs on a host are changed and an ARP cache entry reload is needed, as well as how to flush the complete set of ARP records need to get refreshed, sometimes useful on networks with Buggy Network Switches or when completely changing the set of IP-addresses assigned on a server host.

Clear old Apache Log Backups

Wednesday, August 5th, 2009

I’ve recently wrote a small 3 liner that makes my life easier by cleaning my obsolete apache log files.Check it out clear_old_log_backups.sh END—–